Low-cost high-sensitivity strain and temperature sensing using graded-index multimode fibers.
نویسندگان
چکیده
We report a low-loss, low-cost high-sensitivity all-fiber strain and temperature sensor based on mode interference in graded-index multimode fibers. Blueshifts with strain and temperature sensitivities of 18.6 pm/microstrain and 58.5 pm/ degrees C have been observed. Experimental results show that smaller core diameter graded-index fibers display greater strain-induced peak wavelength shifts than larger core diameter fibers.
منابع مشابه
Strain and temperature sensing based on multimode interference in partially chlorinated polymer optical fibers
We develop strain and temperature sensors based on multimode interference in a partially chlorinated graded-index polymer optical fiber (PCGI-POF) and experimentally investigate their sensing performance at room temperature using incident light of ∼1300 nm wavelength. The length of the PCGI-POF was 0.7m. The measured strain and temperature sensitivities were −4.47 pm/με and +9.66 nm/°C/m, respe...
متن کاملSpatial Frequency Multiplexing of Fiber-Optic Interferometric Refractive Index Sensors Based on Graded-Index Multimode Fibers
Fiber-optic interferometric sensors based on graded-index multimode fibers have very high refractive-index sensitivity, as we previously demonstrated. In this paper, spatial-frequency multiplexing of this type of fiber-optic refractive index sensors is investigated. It is estimated that multiplexing of more than 10 such sensors is possible. In the multiplexing scheme, one of the sensors is used...
متن کاملA Smart Graded-index Multimode Fiber Based Sensor Unit for Multi-parameter Sensing Applications
We demonstrate a smart optical fiber sensor unit to realize a multi-parameter sensing, including temperature, curvature and strain or displacement. The sensor unit is composed of a Bragg grating in graded-index multimode fiber and a Fizeau cavity.
متن کاملLow-Cost Fiber-Tip Fabry-Perot Interferometer and Its Application for Transverse Load Sensing
A Fabry-Perot interferometer sensor based on a fiber-tip bubble-structure micro-cavity is proposed, fabricated, and demonstrated for transverse load sensing. The micro-cavity is fabricated by using arc discharge at the end of a multimode fiber which has been processed with chemical etching. A transverse load sensitivity of 3.64 nm/N and a relative low temperature sensitivity of about 2 pm/◦C ar...
متن کاملHigh performance and highly reliable Raman-based distributed temperature sensors based on correlation-coded OTDR and multimode graded-index fibers
The performance of distributed temperature sensor systems based on spontaneous Raman scattering and coded OTDR are investigated. The evaluated DTS system, which is based on correlation coding, uses graded-index multimode fibers, operates over short-to-medium distances (up to 8 km) with high spatial and temperature resolutions (better than 1 m and 0.3 K at 4 km distance with 10 min measuring tim...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Applied optics
دوره 46 13 شماره
صفحات -
تاریخ انتشار 2007