PSS Design of the Combined Cycle Power Station (CCPS)
نویسندگان
چکیده
The paper presents the project to Power System Stabilizer applied to the generators of the gas turbines of Combined Cycle Power Station. The project developed used MATLAB software for the stabilizer’s parameters calculation. The calculation was gotten from the linear model based on a machine connected on an infinite-bus. The stabilizers had been used to increase the machine eletromechanic oscillation damping. The model’s validation was given for disturbances simulation as load step and lines open. The calculated parameters were compared with that are implemented in field and the ones that are supplied by the manufacturer. The results show that it is possible to improve the power system dynamic performance with this modeling.
منابع مشابه
Thermodynamic modeling and comprehensive off-design performance analysis of a real integrated solar combined cycle power plant
In this paper thermodynamic modeling and comprehensive performance analysis of a real integrated solar combined cycle (ISCC) power plant are performed. Performance of the plant cycle is assessed in off-design condition and in two operation modes of power-boosting and fuel-saving. Such an approach has not been considered for an ISCC plant in the previous studies. Under studied ISCC which is loca...
متن کاملPSS Tuning of the Combined Cycle Power Station by Neural Network
This paper presents a parameter modeling to Power System Stabilizers (PSS) using MLP and RBF neural networks. The application of neural networks in PSS aims to improve the dynamic stability of electric power systems by reducing the machine eletromechanic damping oscillation when a disturbance occurs. According to the current plant operating conditions, the PSS parameters are automatically adjus...
متن کاملModeling of a Geothermal Cycle Condenser in a Combined Diesel Power Cycle: Case Study of 42 MW Diesel Power Plant in Moghan and Ardabil
This paper presents the results of a research into the feasibility of recovering waste heat and determining design parameters of a recovery boiler for a set of medium-speed diesel generators with a capacity of 7 MW (the nominal capacity of all units is 42 MW, which would be a study on a unit). And is used to generate electricity. The main purpose of this study is to design a thermal waste recov...
متن کاملThe Significance of the Priority of Applying the Parameters of Sustainable Development in Combined Cycle Power Plant Design
Power plants with complex technology have various gradations in design process so that this level in the current time by maintaining the goals of sustainability and sustainable development have a critical importance. These buildings require to be sustainable according to their complexity to provide the finance and discrete budgets for functional needs, meanwhile to design solutions to avoid cre...
متن کاملSimulation of a New Hybrid Solar and Organic Cycle as a Combined Cooling, Heat and Power (CCHP) Unit in Off Design Condition
In this paper, using parabolic mirrors, a solar field was designed, which was related to a storage tank for a residential complex in the city of Tafresh located in the center of Iran. The design was performed for the existing oils: VP1, THERMINOL 66, THERMINOL 59. Finally, considering an organic cycle with R123 as working fluid and assuming a minimum length required for oil flow rate to reach a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2007