Some heat engine cycles in which liquids can work.
نویسندگان
چکیده
Liquids can work in heat engine cycles that employ regeneration. Four such cycles are discussed: Stirling, Malone, Stirling-Malone, and Brayton. Both regeneration and the role of the second thermodynamic medium are treated, and the principles are verified by quantitative measurements with propylene in a Stirling-Malone cycle.
منابع مشابه
Comparison of Performances for Air-Standard Atkinson and Dual Combustion Cycles with Heat Transfer Considerations
There are heat losses during the cycle of real engine that are neglected in ideal air-standard analysis. In this paper, the effect of heat transfer on the net output work is shown and thermal efficiency of the air-standard Atkinson and the Dual combustion cycles are analyzed. Comparison of performances of the air-standard Atkinson and the Dual combustion cycles with heat transfer considerations...
متن کاملAn Investigation on the Effects of Gas Pressure Drop in Heat Exchangers on Dynamics of a Free Piston Stirling Engine
This paper is devoted to study the effects of pressure drop in heat exchangers on the dynamics of a free piston Stirling engine. First, the dynamic equations governing the pistons as well as the gas pressure equations for hot and cold spaces of the engine are extracted. Then, by substituting the obtained pressure equations into the dynamic relationships the final nonlinear dynamic equations gov...
متن کاملSimulation of Boiling Heat Transfer within Water Jacket of 4-cylinder Gasoline Engine (TECHNICAL NOTE)
Shrinking the engine has been a great interest for many years. Providing more amount of heat transfer may supply possibilities for size reduction in engine parts specifically the engine water jacket that is of concentration for the present study. Boiling phenomenon, by providing more amounts of heat transfer in comparison with single-phase, provides conditions for size reduction. In this paper ...
متن کاملExperimental and finite element vibrational analysis of exhaust manifold heat shield
Most of internal combustion engines have one or two heat shields that have been installed on the exhaust manifold to avoid the heat transfer to upper parts of the engine such as the valve cover. In some engines, this part fails due to the fracture and causes engine noise and other failures in the engine. In this paper, the failure of a heat shield due to vibrational loads of the engine has been...
متن کاملاحتراق ذرات سوخت زیست‌توده در یک واحد تولید همزمان توان و حرارت مقیاس کوچک
Increasing energy cost and reduction of fossil fuel resources have been resulted in increasing demand of renewable energy, such as micro biomass particles in small scale Stirling engines to generate combined heat and power. In such Stirling engines, biomass particles are burnt in external combustion chamber and then, the generated heat is transferred to the working fluid of the engine cycle. Th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Proceedings of the National Academy of Sciences of the United States of America
دوره 78 1 شماره
صفحات -
تاریخ انتشار 1981