Diffuse interface model for structural transitions of grain boundaries
نویسندگان
چکیده
The conditions for structural transitions at the core of a grain boundary separating two crystals was investigated with a diffuse interface model that incorporates disorder and crystal orientation Kobayashi et al., Physica D 140, 141 2000 . The model predicts that limited structural disorder near the grain boundary core can be favorable below the melting point. This disordered material is a precursor to a liquid phase and therefore the model represents grain boundary premelting. This model is shown to be isomorphic to Cahn’s critical point wetting theory J.W. Cahn, J. Chem. Phys. 66, 3667 1977 and predicts firstand higher-order structural grain boundary transitions. A graphical construction predicts the equilibrium grain boundary core disorder, the grain boundary energy density, and the relative stability of multiple grain boundary “complexions.” The graphical construction permits qualitative inference of the effect of model properties, such as empirical homogeneous free energy density and assumed gradient energy coefficients, on properties. A quantitative criterion is derived which determines whether a first-order grain boundary transition will occur. In those systems where first-order transition does occur, they are limited to intermediate grain-boundary misorientations and to a limited range of temperatures below the melting point. Larger misorientations lead to continuously increasing disorder up to the melting point at which the disorder matches a liquid state. Smaller misorientation continuously disorder but are not completely disordered at the melting point. Characteristic grain boundary widths and energies are calculated as is the width’s divergence behavior at the melting point. Grain boundary phase diagrams are produced. The relations between the model’s predictions and atomistic simulations and with experimental observations are examined.
منابع مشابه
Effect of grain boundary character on segregation-induced structural transitions
Segregation-induced structural transitions in metallic grain boundaries are studied with hybrid atomistic Monte Carlo/molecular dynamics simulations using Cu-Zr as a model system, with a specific emphasis on understanding the effect of grain boundary character. With increasing global composition, the six grain boundary types chosen for this paper first form ordered complexions, with the local s...
متن کاملSurface energies in multi phase systems with diffuse phase boundaries
A Ginzburg–Landau type functional for a multi–phase system involving a diffuse interface description of the phase boundaries is presented with the following calibration property: Prescribed surface energies (possibly anisotropic) of the phase transitions are correctly recovered in the sense of a Γ–limit as the thickness of the diffuse interfaces converges to zero. Possible applications are grai...
متن کاملGrain boundary order-disorder transitions
The conditions for grain boundary (GB) structural transitions are determined from a diffuse interface model that incorporates structural disorder and crystallographic orientation. A graphical construction and numerical calculations illustrate the existence of a first-order GB order–disorder transition below the bulk melting point. When thermodynamic conditions permit their existence, disordered...
متن کاملInfluence of interface structure on mass transport in phase boundaries between different ionic materials
ABSTRACT Internal and external interfaces in solids exhibit completely different transport properties compared to the bulk. Transport parallel to grain or phase boundaries is usually strongly enhanced. Transport perpendicular to an interface is usually blocked, i.e., transport across an interface is often much slower. Due to the high density of interfaces in modern micro- and nanoscaled devices...
متن کاملDiffuse-interface polycrystal plasticity: Expressing grain boundaries as geometrically necessary dislocations
*Correspondence: [email protected] 1Materials Science and Engineering Department, University of California Los Angeles, Los Angeles, California, USA 2Mechanical and Aerospace Engineering Department, University of California Los Angeles, Los Angeles, California, USA Abstract The standard way of modeling plasticity in polycrystals is by using the crystal plasticity model for single crystals in eac...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2005