A Novel Hybrid-Flux Magnetic Gear and Its Performance Analysis Using the 3-D Finite Element Method
نویسندگان
چکیده
This paper presents a novel hybrid-flux magnetic gear, which integrates a transverse-flux magnetic gear and an axial-flux magnetic gear into a single unit. Compared to its conventional counterparts, the proposed magnetic gear transmits a relatively high torque density. When compared to the transverse-flux magnetic gear, this new structure employs an extra iron segment between the low-speed rotor and high-speed rotor to modulate the magnetic field and contribute to the transmission of additional torque. A three-dimensional (3-D) finite element method (FEM) is used for the analysis of the magnetic field. In the paper a variables-decoupling method based on the sensitivity analysis of the design parameters is also presented to accelerate the optimization process of the proposed machine.
منابع مشابه
Novel Axial Flux Brushless Resolver Analysis and Optimization Using 3D Finite Element and d-q Model Method
Resolvers are widely used in electric driven systems especially in high precision servomechanisms. Both encapsulated and pancake resolvers suffer from a major drawback: static eccentricity (SE). This drawback causes a significant increase in resolver output position error (RPE) which could not be corrected electronically. To reduce RPE, this paper proposes a novel structure with axial flux. Pr...
متن کاملElectromagnetic field analysis of novel low cogging force, linear switched reluctance motor, based on 2-D finite element method
This paper deals with electromagnetic design and 2-D (two-dimensional) magnetic field analysis of novel low force ripple linear switched reluctance (LSR) motor. The configuration that has been presented here has a higher number of rotor poles than stator poles, and the purpose of this configuration is to improve the force ripple, which is the weak point of LSRMs. In order to illustrate the ...
متن کاملA Novel Technique on the Analytical Calculation of Open-Circuit Flux Density Distribution in Brushless Permanent-Magnet Motor
Both the cogging and electromagnetic torques depends on the shape of the flux density distribution in the airgap region. A two-dimensional (2-D) analytical method for predicting the open- circuit airgap field distribution in brushless permanent magnet motors, considering the direction of magnetization, i.e., radial or parallel, and the effect of real shape of stator slot-openings is presented i...
متن کاملDevelopment of Linear Vernier Hybrid Permanent Magnet Machine for Wave Energy Converter
Today, due to the limited supply and rapid consumption of fossil fuels, transitioning towards renewable energy supplies has become more important than ever.. The purpose of this paper is to present a new linear permanent magnet vernier machine structure which is designed to capture wave energy and improve the performance of the prototype vernier machine. By halving the proposed vernier machine,...
متن کاملAnalysis of Magnetic Flux Linkage Distribution in Salient-Pole Synchronous Generator with Different Kinds of Inter-Turn Winding Faults
A reliable and accurate diagnosis of inter-turn short circuit faults is a challenging problem in the area of fault diagnosis of electrical machines. The purpose of this challenge is to be more efficient in fault detection and to provide a reliable method with low-cost sensors and simple numerical algorithms which not only detect the occurrence of the fault, but also locate its position in the w...
متن کامل