Compact GaSb/silicon-on-insulator 2.0x μm widely tunable external cavity lasers.

نویسندگان

  • Ruijun Wang
  • Aditya Malik
  • Ieva Šimonytė
  • Augustinas Vizbaras
  • Kristijonas Vizbaras
  • Gunther Roelkens
چکیده

2.0x µm widely tunable external cavity lasers realized by combining a GaSb gain chip with a silicon photonics waveguide circuit for wavelength selection are demonstrated. Wavelength tuning over 58 nm from 2.01 to 2.07 µm is demonstrated. In the silicon photonic integrated circuit, laser feedback is realized by using a silicon Bragg grating and continuous tuning is realized by using two thermally tuned silicon microring resonators (MRRs) and a phase section. The uncooled laser has maximum output power of 7.5 mW and threshold current density of 0.8 kA/cm2. The effect of the coupling gap of the MRRs on tunable laser performance is experimentally assessed. A side mode suppression ratio better than 52 dB over the full tuning range and in the optimum operation point of more than 60 dB is achieved for the laser with weakly coupled MRRs.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

III–V-on-Silicon Photonic Integrated Circuits for Spectroscopic Sensing in the 2–4 μm Wavelength Range

The availability of silicon photonic integrated circuits (ICs) in the 2-4 μm wavelength range enables miniature optical sensors for trace gas and bio-molecule detection. In this paper, we review our recent work on III-V-on-silicon waveguide circuits for spectroscopic sensing in this wavelength range. We first present results on the heterogeneous integration of 2.3 μm wavelength III-V laser sour...

متن کامل

Extended range tuning elements for a microelectromechanical systems external cavity laser

A modified tuning element for a Littrow external cavity laser is demonstrated using microelectromechanical systems technology. The device combines a vertically etched blazed grating, a compound flexure suspension and drive elements for translating and rotating the grating. Tuning is linearized by linking the grating to a remote actuator by a flexible linkage. A simple theoretical model of the l...

متن کامل

Precision MEMS flexure mount for a Littman tunable external cavity laser

A tuning element has been constructed using micro-opto-electro-mechanical systems (MOEMS) technology for Littman configuration external cavity tunable lasers. The device is fabricated by deep reactive ion etching of bonded silicon-on-insulator, using a single layer of patterning to integrate a fixed grating and a mirror that is rotated about a virtual pivot by an electrostatic comb drive. The m...

متن کامل

Monolithically, widely tunable quantum cascade lasers based on a heterogeneous active region design

Quantum cascade lasers (QCLs) have become important laser sources for accessing the mid-infrared (mid-IR) spectral range, achieving watt-level continuous wave operation in a compact package at room temperature. However, up to now, wavelength tuning, which is desirable for most applications, has relied on external cavity feedback or exhibited a limited monolithic tuning range. Here we demonstrat...

متن کامل

Widely Tunable Monolithic Mid-Infrared Quantum Cascade Lasers Using Super-Structure Grating Reflectors

A monolithic, three-section, and widely tunable mid-infrared (mid-IR) quantum cascade laser (QCL) is demonstrated. This electrically tuned laser consists of a gain section placed between two super structure grating (SSG) distributed Bragg reflectors (DBRs). By varying the injection currents to the two grating sections of this device, its emission wavelength can be tuned from 4.58 μm to 4.77 μm ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:
  • Optics express

دوره 24 25  شماره 

صفحات  -

تاریخ انتشار 2016