Oxidation Proof Silicate Surface Coating On Iron Sulfides
نویسنده
چکیده
منابع مشابه
The surface properties of bornite
The surfaces of fresh and tarnished (through exposure to the atmosphere) bornite have been studied by measurement of reflectance and quantitative colour parameters in the visible region, X-ray photoelectron and Auger electron spectroscopy, and conversion electron M6ssbauer spectroscopy. The results of these studies, in combination with those of previous workers, indicate that a surface coating ...
متن کاملThermal shock and oxidation resistant gradient coating based on yttrium silicate for C/SiC composite
Yttrium silicate coating[5, 6] is a promising candidate for oxidation resistant coating for its low oxygen diffusion coefficient and similar thermal expansion coefficient with silicon carbide. Webster et. al.[7] had prepared yttrium silicate coating on C/SiC using Y2O3/SiO2 slips by slip casting and sintering. The selected sintering parameters were 3 h at 1600 °C in flowing argon. The coating c...
متن کاملPreparation ZrO2 ceramic coating by electrolytic plasma oxidation and study of the effect of monoclinic/tetragonal phases on the corrosion resistance of the coating
In this paper, zirconium oxide ceramics coating (ZrO2) were produced on Zircaloy-4 alloy using plasma electrolytic oxidation (PEO). Sodium silicate and Sodium aluminate based electrolyte was selected in PEO process and the effects of the concentration of Sodium aluminate (0, 2.5, 5, 7.5, and 10 g/L) on the microstructure, phase structure and the behavior of corrosion of formed coatings. In orde...
متن کاملPretreatment of Gray Cast Iron for Hard Chromium Electroplating (RESEARCH NOTES)
From the standpoint of processing, hard chromium layer plate may be applied to steels, cast iron, aluminum and nickel base alloys. Cast iron can be plated provided that the surface is capable of conducting the required current and is reasonably free of voids, pits, gross silicate inclusions, and massive segregation. There are many difficulties arising from graphite phase and deposition of hydro...
متن کاملEffect of the Surface Oxidation on the Hot-dip Zinc Galvanizing of Cast Iron Wpływ Powierzchniowego Utleniania Na Efekty Cynkowania Ogniowego Żeliwa
In presented work authors analyzed the high-temperature oxidation process from the point of view of its influence on effects obtained during cast iron hot-dip zinc coating. Research concerned the influence of the high-temperature oxidation, as a preliminary stage previous to coating with zinc on the change of surface layer structure as well as subsurface layer of cast iron with flake, vermicula...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2017