Green paper-based piezoelectric material for sensors and actuators
نویسندگان
چکیده
In this work, the fabrication of Rochelle salt based piezoelectric structures is illustrated. Structures composed of paper and Rochelle salt are easily manufactured using simple processes. Both manufacturing and the material itself are environmental friendly. Additionally Rochelle salt is biocompatible. In the paradigm of a cleaner piezoelectric technology, the fabrication of active sensing or actuating devices is developed. Thus processing method, material and piezoelectric properties have been studied: (1) pure crystals are used as acoustic actuator, (2) properties of paper impregnated with Rochelle salt are detailed, (3) charge generation is demonstrated on the impregnated material. Actuating and sensing devices are reported in order to highlight the potential of this green piezoelectric material. © 2015 The Authors. Published by Elsevier Ltd. Peer-review under responsibility of the organizing committee of EUROSENSORS 2015.
منابع مشابه
Mechanical Buckling of FG Saturated Porous Rectangular Plate with Piezoelectric Actuators
In this study buckling analysis of solid rectangular plate made of porous material bounded with the layers of piezoelectric actuators in undrained condition is investigated. Porous material properties vary through the thickness of plate with a specific function. Distributing of the pores through the plate thickness is assumed to be the nonlinear nonsymmetric distribution. The ...
متن کاملElectro-Mechanical Buckling of a Piezoelectric Annular Plate Reinforced with BNNTs Under Thermal Environment
In this article, axisymmetric buckling behavior of piezoelectric fiber reinforced polymeric composite (PFRPC) annular plate subjected to electro-thermo-mechanical field is presented utilizing principle of minimum potential energy. Boron-nitride nanotubes (BNNTs) are used as fibers. Full coupling between electrical, mechanical and thermal fields are considered according to a representative volum...
متن کاملAn Investigation into Resonant Frequency of Triangular V-Shaped Cantilever Piezoelectric Vibration Energy Harvester
Power supply is a bottle-neck problem of wireless micro-sensors, especially where the replacement of batteries is impossible or inconvenient. Now piezoelectric material is being used to harvest vibration energy for self-powered sensors. However, the geometry of a piezoelectric cantilever beam will greatly affect its vibration energy harvesting ability. This paper deduces a remarkably precise an...
متن کاملBuckling Analysis of FG Plate with Smart Sensor/Actuator
In this paper, the active buckling control of smart functionally graded (FG) plates using piezoelectric sensor/actuator patches is studied. A simply supported FG rectangular plate which is bonded with piezoelectric rectangular patches on the top and/or the bottom surface(s) as actuators/sensors is considered. When a constant electric charge is imposed, the governing differential equations of mo...
متن کاملAnalytical Approach for Vibration Analysis of a Microsensor with Two layers of Silicon and Piezoelectric based on MCST
The vibration analysis is an important step in the design and optimization of microsensors. In most of the cases, COMSOL software is employed to consider the size-dependency on the dynamic behavior in the MEMS sensors. In this paper, the Modified Couple Stress Theory (MCST) is used to capture the size effect on dynamic behavior in a microsensor with two layers of the silicon and piezoelectric. ...
متن کامل