Variability of Poisson’s Ratio and Enhanced Ductility in Amorphous Metal**

نویسندگان

  • Dongdong Qu
  • Kun Yan
  • Mark Reid
  • Jonathan Almer
چکیده

Ductile bulk metallic glass of composition 53.0Zr–18.7Cu–12.0Ni–16.3Al (at%) is plastically deformed under uniaxial compression and observed in situ by synchrotron high-energy X-ray diffraction. The diffraction patterns reveal the induced atomic strain is orientation dependent. At the onset of plastic deformation, the atomic strain in the compression direction saturates to a close-nearest-neighbor distance while atoms relax in the transverse direction. The ever increasing transverse atomic strain expresses in an augmentation of the apparent Poisson’s ratio up to n1⁄4 0.5, which is consistent with volume conservation. Contradicting phenomena from linear mechanics, such as the non-vanishing shear modulus at n1⁄4 0.5 can be explained by the non-affine character of the deformation, giving rise to characteristics of a localized martensitic phase transformation. The findings explain the often-reported phenomena such as, the high Poisson’s ratio values found in metallic glasses, the partially liquid character of the structure, the free volume increase and the Bauschinger effect.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

The First-Principles Design of Ductile Refractory Alloys

describe this work to a materials science and engineering professional with no experience in your technical specialty? This paper uses Poisson’s ratio as the screening parameter to identify potential ductilizing additives to the refractory elements such as chromium. First-principles density functional theory calculations are used to predict Poisson’s ratio of various chromium binary alloys. The...

متن کامل

Design and Fabrication of Stent with Negative Poisson’s Ratio

The negative Poisson’s ratios can be described in terms of models based on the geometry of the system and the way this geometry changes due to applied loads. As the Poisson’s ratio does not depend on scale hence deformation can take place at the nano to macro level the only requirement is the right combination of the geometry. Our thrust in this paper is to combine our knowledge of tailored enh...

متن کامل

A density functional study on the mechanical properties of metal-free two-dimensional polymer graphitic Carbon-Nitride

Successful synthesis of the stable metal-free two-dimensional polymer graphitic carbon-nitride with remarkable properties has made it as one of the most promising nanostructures in many novel nanodevices, especially photocatalytic ones. Understanding the mechanical properties of nanostructures is of crucial importance. Thus, this study employs density functional theory (DFT) to obtain the mecha...

متن کامل

A density functional study on the mechanical properties of metal-free two-dimensional polymer graphitic Carbon-Nitride

Successful synthesis of the stable metal-free two-dimensional polymer graphitic carbon-nitride with remarkable properties has made it as one of the most promising nanostructures in many novel nanodevices, especially photocatalytic ones. Understanding the mechanical properties of nanostructures is of crucial importance. Thus, this study employs density functional theory (DFT) to obtain the mecha...

متن کامل

Amorphous Mg-based metal foams with ductile hollow spheres

To date, high compressive ductility and energy absorption have been achieved in amorphous metal foams based on high-toughness Pdand Zr-based metallic glasses and are known to result from two extrinsic toughening mechanisms: bending of struts and shear band arrest by pores. We study here a syntactic amorphous metallic foam produced by infiltration of a bed of hollow crystalline iron spheres with...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2012