[Article] Investigating the properties of interfacial layers in planar Schottky contacts on hydrogen-terminated diamond through direct current/small- signal characterization and radial line small-signal modelling

نویسندگان

  • F. Cappelluti
  • G. Ghione
  • S. A. O. Russell
  • D. A. J. Moran
چکیده

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Modelling and Simulation of Low-Head Hydro Turbine for Small Signal Stability Analysis in Power System

The hydro turbine dynamics have a considerable influence on the dynamic stability of power system. In the study of dynamic stability, the system is modeled by the linear differential equations (small  signal analysis). Small signal stability of power systems is needed in all conditions and only is dependent on the conditions of power system performance before commotion occurrence. This paper pr...

متن کامل

A Comparative Study on the Effect of Optical Illumination on Si1-xGex and Si based DDR IMPATT Diodes at W-Band

The effect of optical illumination on DC and dynamic performance of Si1-xGex based double drift region (DDR) (p+pnn+) IMPATT diode operating at W-Band is investigated and compared with its Silicon counterpart. Top Mounted (TM) and Flip Chip (FC) structures are chosen and the composition of photocurrent is altered by shining light on the p+ side and n+ side of the device through optical windows....

متن کامل

Investigating of Process Design Parameters in 4043 alloy Additive Manufactured specimens, to create external features of cylinder head

In Wire and Arc Additive Manufacturing (WAAM), a 3D object is created from small material sectors,. It usually adds layers of material continuously to produce the final shape. The challenges facing additive manufacturing methods for functional or mass production parts, are still complex geometries, used materials, quality of manufactured components, cycle time and cost. The solubility of hydrog...

متن کامل

Investigation of post-annealing effect on efficient ohmic contact to ZnO thin film using Ti/Al metallization strategy

Ohmic and Schottky contacts are playing a major role in the field of ZnO based electronics device fabrication. It is seen that several works have been reported on metallization scheme, contacts with this semiconducting material. But, the thickness of semiconducting material and the choosing of substrate still remain imperfect and inefficient for advanced IC technology. To estimate contact resis...

متن کامل

Designing and Fabrication of a New Radiofrequency Planar microcoil for mini-Nuclear Magnetic Resonance

Introduction Radiofrequency planar microcoils are used to increase the resolution of magnetic resonance images of small samples. In this study, we aimed to design and fabricate a spiral planar microcoil constructed on a double-sided printed circuit board (PCB). It has four rings with an internal diameter of 241 microns tuned and matched at 63.8 MHz. Materials and Methods To achieve the maximum ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2016