Thermocharge of a hot spot in an electrolyte solution
نویسندگان
چکیده
منابع مشابه
Simulation of Subcooled Flow Boiling Occurring in Internal Combustion Engine Water Jacket by Numerical Modeling in a Channel with Hot Spot
Boiling heat transfer always has been proposed as a solution for enhancing heat transfer between the fluid and solid surfaces. Subcooled flow boiling is one of the mechanisms that occur in Internal Combustion Engine water jacket in which high amounts of heat is transferred. In this research, it has been tried to simulate subcooled flow boiling in a geometry similar to coolant channel inside the...
متن کاملInvestigating the Solubility of CO2 in the Solution of Aqueous K2CO3 Using Wilson-NRF Model
Hot potassium carbonate (PC) solution in comparison with amine solution had a decreased energy of regeneration and a high chemical solubility of . To present vapor and liquid equation (VLE) of this system and predict solubility, the ion specific non-electrolyte Wilson-NRF local composition model (isNWN) was used in this study; the framework of this model was molecular. Therefore, it was suitab...
متن کاملمقایسه موردی روشهای مختلف تعیین تنش هاتاسپات در جزئیات سازه کشتی
Fatigue analysis and estimation of safe life of structures that are subjected to cyclic loadings, such as ships and offshore structures is one of the most important steps of structural design. Fatigue failure in the form of crack will start from details and propagate in structure. In steel structures these cracks will started from welds. Most of the methods for fatigue life assessment in welded...
متن کاملBuckling Analysis of Cantilever Nanoactuators Immersed in an Electrolyte: A Close Form Solution Using Duan-Rach Modified Adomian Decomposition Method
A new modified Adomian Decomposition Method (ADM) was utilized to obtain an analytical solution for the buckling of the nanocantilever actuators immersed in liquid electrolytes. The nanoactuators in electrolytes are subject to different nonlinear forces including ionic concentration, van der Waals, external voltage and electrochemical forces. The Duan–Rach modified Adomian decomposition method ...
متن کاملHot Spot Stress Determination for a Tubular T-Joint under Combined Axial and Bending Loading
Finite element analysis of a tubular T-joint subjected to various loading conditions including pure axial loading, pure in-plane bending (IPB) and different ratios of axial loading to in-plane bending loading has been carried out. This effort has been established to estimate magnitudes of the peak hot spot stresses (HSS) at the brace/chord intersection and to find the corresponding locations as...
متن کامل