Design of Tread Flange Injection Mold Based on Pro/E
نویسنده
چکیده
In the paper, analyzing the tread flange structure characteristics ,its injection mold is designed and the maneuvering tread demolding way is applied to get out flang tread .When designing demolding parts, hydraulic pressure motor and chain-gear mechanism are used. Besides, parting plane and the forming parts can be gained automatically in Pro/E(Pro/Engineer Wildfire3.0)and standard moldbase can be achieved by EMX4.1 including gating ,cooling, and guiding system, etc. The designing ways and structure is proved rational and can be taken as reference for the similar injection mold especially for those with longer tread.
منابع مشابه
Statistical Modelling of Wear and Damage Trajectories of Railway Wheelsets
This paper discusses the use of Linear Mixed Models (LMM) and Generalized Linear Mixed Models (GLMM) to predict the wear and damage trajectories of railway wheelsets for a fleet of modern multiple unit trains. The wear trajectory is described by the evolution of the wheel flange thickness, the flange height and the tread diameter; whereas the damage trajectory is assessed through the probabilit...
متن کاملDevelopment of Friction Moderating System to Improve Wheel/Rail Interface in Sharp Curves
Lubrication on sharp curves has been commonly adopted as a method of reducing friction between the wheel flange and rail gauge face to minimize wear and energy consumption. Additionally, lubrication between the running surface of the low-rail and the wheel tread has recently been recognized as a significant factor in reducing the likelihood of low-rail corrugation, squealing noise and rail gaug...
متن کاملEffects of the Bogie and Body Inertia on the Nonlinear Wheel-set Hunting Recognized by the Hopf Bifurcation Theory
Nonlinear hunting speeds of railway vehicles running on a tangent track are analytically obtained using Hopf bifurcation theory in this paper. The railway vehicle model consists of nonlinear primary yaw dampers, nonlinear flange contact stiffness as well as the clearance between the wheel flange and rail tread. Linear and nonlinear critical speeds are obtained using Bogoliubov method. A compreh...
متن کاملThe Influence of Route Characteristics, Train Design and Maintenance Policy on Wheel Tread Damage, Wheel Life and Costs for Multiple-unit Trains
In the UK, the use of similar vehicle types by a range of privatised operators gives the opportunity to assess the influence of different route conditions and maintenance practices on wheel tread damage, wheelset life and costs. This paper investigates these influences, using data obtained directly from the train operators and maintainers. By disseminating best practice it is expected that whee...
متن کاملOptimization of the injection molding process of Derlin 500 composite using ANOVA and grey relational analysis
Warpage and shrinkage control are important factors in proving the quality of thin-wall parts in injection modeling process. In the present paper, grey relational analysis was used in order to optimize these two parameters in manufacturing plastic bush of articulated garden tractor. The material used in the plastic bush is Derlin 500. The input parameters in the process were selected according ...
متن کامل