A Parameterizable Fault Simulator for Bridging Faults
نویسندگان
چکیده
We present the concept of a multiple-valued logic simulator that is able to more accurately determine the possible behavior of a circuit in the presence of a bridging faults. By a user de ned mapping of a range of voltages to a logic value the simulator takes care of certain voltages more closely than common bridge fault simulators that map all voltages to either logic 1 or 0. Experimental results are given to demonstrate the improved fault detection possibilities.
منابع مشابه
Accurate Fault Modeling and Fault Simulation of Resistive Bridges
This paper presents accurate fault models, an accurate fault simulation technique, and a new fault coverage metric for resistive bridging faults in gate level combinational circuits at nominal and reduced power supply voltages. We demonstrate that some faults have unusual behavior, which has been observed in practice. On the ISCAS85 benchmark circuits we show that a zero-ohm bridge fault model ...
متن کاملOn the Development of a Fast and Accurate Bridging Fault Simulator
This paperpresent~ an alternative modeling and simulation method for CMOS bridging faults. The significance of the method is the introduction of a set of unique-bridge tables which characterize the bridged outputs for each bridge and a set of unique-cell tables which characterize how each cell interprets an analog input. These two sets of tables are derived dynamically for a specific design by ...
متن کاملSimulation of non-classical Faults on the Gate Level - The Fault Simulator COMISM -
COMSIM is a fault simulator for combinational circuits which can efficiently handle various gate level fault models. Stuck-at faults, function conversions, bridging faults, transition faults as well as multiple faults of all types and faults with additional fault detection conditions, can be simulated in one pass. This offers a practical approach to solve the conflict between the accuracy of fa...
متن کاملAn efficient CMOS bridging fault simulator: with SPICE accuracy
This paper presents an alternative modeling and simulation method for CMOS bridging faults. The significance of the method is the introduction of a set of generic-bridge tables which characterize the bridged outputs for each bridge and a set of generic-cell tables which characterize how each cell propagates a logically undefined input. These two sets of tables are derived dynamically for a spec...
متن کاملCURRENT : A Test Generation System for I TestingDDQ
This paper presents an I test generation system for DDQ scan-based circuits, called CURRENT. A library-based fault modeling strategy is used to specify a realistic target fault set, which encompasses intra-gate shorts (for example stuck-on faults, gate-drain shorts) as well as inter-gate shorts (bridging faults). CURRENT consists of a fault simulator and a deterministic test generator. The faul...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2000