The flocculation efficiency of polydisperse polymer flocculants
نویسندگان
چکیده
The flocculation performance of three poly(acrylic acid) (PAA) samples (Mw = 9 10, 2.5 10 and 1 10 g/mol) has been investigated. Colloidal alumina particles were used as a model system and tests were performed at pH 5. Using a singlecomponent polyacid, it was found that the optimum dosage required to achieve supernatant clarity was similar between the 9 10 g/mol PAA (23 ppm) and 2.5 10 g/mol PAA (26 ppm), but increased dramatically with the 1 10 g/mol PAA (83 ppm). For the two lower molecular weight samples, flocculation occurs through a charge neutralisation mechanism. In contrast, polymer bridging is inferred to be the dominant flocculation mechanism for the high molecular weight sample. The flocculation performance of a polymer mixture, produced by blending the high and low molecular weight polyacids to give an average molecular weight of 2.5 10 g/mol, was also studied. Supernatant clarity from this system was found to be comparable to that from the single-component polyacid of the same (average) molecular weight. However, the optimum dosage required for the polymer mixture was about twice as much as that for the single-component reference polymer. The results suggest that for the polymer mixture no synergistic effects occur. Instead, analyses of aggregate sizes indicate an independent behaviour for the two polymers in the blend. We also examined re-suspension (under shear) and re-flocculation of the sediment formed in the initial flocculation experiments. For the three single-polymer systems, rapid re-flocculation after shear was seen for the two lower molecular weight samples suggesting a reversible aggregate breakage. For the high molecular weight sample, re-suspension resulted in the formation of a stable dispersion. This result was attributed to breakage of the high molecular weight polymer sample during re-suspension. In the case of the polymer mixture, rapid re-flocculation was again observed despite the presence of a large amount of the high molecular weight sample. This result may have important practical implications. D 2004 Elsevier B.V. All rights reserved.
منابع مشابه
Settling Rates for Flocculation of Iron and Manganese Ore-Containing Suspensions by Cationic Glycogen
Novel flocculants have been synthesized on the basis of glycogen. The efficiency of cationic glycogen can be explained in terms of Singh’s qualitative easy approachability model (EAM). The jar test was used previously to evaluate flocculation efficacy, but we have recently shown that a plot of interface height vs. settling times provides a better measure. In accord with the EAM, a one-to-one co...
متن کاملFlocculation of kaolin by waxy maize starch phosphates
Waxy maize starch phosphates were tested as flocculants in order to determine if they have the potential to replace petroleum-based polymer flocculants currently used commercially. Phosphorylation was carried out by dry heating of starches and sodium orthophosphates at 140 C for 4 h. Native and phosphorylated waxy maize starches were ineffective as flocculants for kaolin in deionized water. How...
متن کاملThe Application of Cluster-Surfactant Flocculants in the Advanced Treatment of Coking Industrial Wastewater Reclamation
Coking wastewater from the process of coking, coal gas purification and the coking products refine, whose ingredients are complicated and inconstant, is hard to meet the standard of reclaimed water used for industrial water by secondary treatment. In view of this situation, the advanced treatment technique of coking wastewater was desired. The innovatory flocculation treatment was used to regen...
متن کاملProperties and Flocculation Efficiency of Cationized Biopolymers and Their Applicability in Papermaking and in Conditioning of Pulp and Paper Sludge
Safe biodegradable “green” alternatives with minimal environmental and health risks have received widespread research interest. Thirty different kinds of bio-based flocculants (modified starches, modified celluloses, native chitosan, and lignin-based flocculant) were pre-tested using a simple jar test for the examination of the applicability of new organic flocculants in papermaking and in cond...
متن کاملPolymeric Flocculants for Wastewater and Industrial Effluent Treatment
The fact that water is the most important material used by mankind defines the importance of water purification. Wastewater and industrial effluent treatment require removal of suspended solids for purification and possible re-usage. The removal can be accomplished by gravitation (very slow), by coagulation (dependent on electric charge situation) and by flocculation (not dependent on electric ...
متن کامل