Laser Beam Shaping and Transformation Using Freeform Surface Design
نویسندگان
چکیده
........................................................................................................................................... ii Acknowledgments........................................................................................................................... iv Table of
منابع مشابه
Using of Broadened Asymmetric Waveguide Structure for 980nm Diode Laser
Laser diode beam divergence is the main parameter for beam shaping and fiber optic coupling. Increasing the waveguide layer thickness is the conventional method to decrease the beam divergence. In this paper, the broadened asymmetric waveguide is introduced to decrease the divergence without increasing the optical power. The asymmetric waveguide was used to shift the vertical optical field to n...
متن کاملAltitude measurement using laser beam reflected from water surface
In this paper altitude measurement from water surface using laser beam is presented. Research data indicate that the reflection of infrared waves from water surface is about zero and it is less than 2% for visible radiations. Phase-shift and heterodyne technique was used for the measurement, and the laser beam ( mW p nm 10 , 700 = = l ) was modulated by a sine wave having a fixed frequency....
متن کاملOptical Design of Laser Beam Shaping Systems
An overview of the history and current practices of laser beam shaping is presented. When diffraction effects are not important, geometrical methods for laser beam shaping (ray tracing, conservation of energy within a bundle of rays, and the constant optical path length condition) can be used to determine system configurations, including aspheric elements and spherical-surface GRIN lenses, whic...
متن کاملHistorical perspective of laser beam shaping
An overview of the history and current practices of laser beam shaping is presented. When diffraction effects are not important, geometrical methods for laser beam shaping (ray tracing, conservation of energy within a bundle of rays, and the constant optical path length condition) can be used to determine system configurations, including aspheric elements and spherical-surface GRIN lenses, whic...
متن کاملEvaluating Wear Properties of AISI 420 Martensitic Stainless Steel after Laser Transformation Hardening
As the turbine industries need to manufacture turbine blades made of martensitic stainless steel AISI 420 with high toughness and wear resistance, local laser hardening has become more and more important. In this research, surface of the samples was initially hardened by high-power pulsed laser beam; then, optimum parameters of hardening were calculated and wear resistance of surface hardened s...
متن کامل