Internal Friction in Fe-Co-Ni-Ti Shape Memory Alloys
نویسندگان
چکیده
The anomalies of the temperature dependences of the logarithmic decrement and eigen frequency of the free damped vibrations for Fe-Co-Ni-Ti shape memory alloys were first found in the vicinity of the reverse ay martensitic transformation. It was shown the damping capacity in the alloys investigated is comparable with that for TiNi based alloys.
منابع مشابه
Martensitic transformation and shape memory effect in B2 intermetallic compounds of titanium
2014 Crystallographic and kinetic characteristics of martensitic transformations and parameters of shape memory effect in B2 compounds of titanium Ti50Ni50-xXx (X = Fe, Co, Pd, Pt, Au, Cu) and Ti50Pd50-xYx (Y = Fe, Co, Cu), where 0 ~ x ~ 50 are investigated. Temperature, hysteresis, value of reversible deformation and stress of martensitic shear for martensitic transformations and shape memory ...
متن کاملEffects of Composition and Ausaging
Magnetic Shape-Memory (MSM) materials are a new category of actuator materials with the potential to produce both large actuator strain and rapid response. To explore the possibility of developing MSM materials based on Fe-Ni-Co-Ti alloys, the effects of chemical composition (Co/Ni ratio) and ausaging on microstructure and magnetic shapememory response were studied. A suitable choice of chemica...
متن کاملTRANSFORMATION BEHAVIOR OF NiTi SHAPE MEMORY ALLOYS TREATED BY THERMOMECHANICAL PROCESSING USING DSC
Abstract: In the present study the effect of thermomechanical treatment (cold work and annealing) on the transformation behavior of NiTi shape memory alloys was studied. Differential scanning calorimetry was used to determine transformation temperature and its relation to precipitates and defects. Three alloys including Ti-50.3at.% Ni, Ti-50.5at.% Ni (reclamated orthodontic wires) and 50.6at...
متن کاملFerromagnetic shape memory alloys: Alternatives to Ni–Mn–Ga
This paper intends to review the state-of-the-art in the field of ferromagnetic shape memory alloys different than Ni–Mn–Ga, developed in the ast years. It starts with the effects of additions of different fourth elements to Ni–Mn–Ga and continues with the review of other Heusler (or B2) i-based and Co-based alloy systems, like Ni–Mn–X, Ni–Fe–Ga, Co–Ni–Al and Co–Ni–Ga alloys. Finally, ferromagn...
متن کاملCorrosion of Ni-Ti Rotary Instruments: A Review
The nickel-titanium (Ni-Ti) alloys used in endodontics contain 56% Ni and 44% Ti. The 2 unique features related to clinical dentistry (i.e., shape memory effect and superelasticity) are due to the transition from austenite to martensite in Ni-Ti alloy. When a superelastic Ni-Ti alloy undergoes a low tensile loading, normal elastic behavior occurs. In fact, at higher tensile loads, the elastic s...
متن کامل