Process Monitoring of Cast Explosive Solidification Molding by on-line Multichannel Ultrasonic Measurement
نویسندگان
چکیده
The process of cast explosive solidification molding has been dynamic monitored by multi-channel ultrasonic transmission method. It presents the regular pattern of ultrasonic attenuation, velocity and waveform in this process. The results show that velocity values and waveform are relative to solidification speed and physical characterization on the phase border, and ultrasonic attenuation is relative to the density and structure of the explosive that contains blowholes and cracks. The data indicate that ultrasonic transmission method can be used to reveal the regular of the solidification and to monitor production’s quality in real-time effectively.
منابع مشابه
Investigation of pressure-volume-temperature relationship by ultrasonic technique and its application for the quality prediction of injection molded parts
In this study, an ultrasonic technique was employed to obtain pressure-volume-temperature (PVT) relationship of polymer melt by measuring ultrasonic velocities under various temperatures and pressures. The proposed technique was applied to on-line monitoring of injection molding process as an attempt to predict quality of molded parts. From the comparison based on Tait equation, it was confirme...
متن کاملOptimized Blood Volume Monitoring during Hemodialysis Procedure based on Ultrasonic Speed Measurement
Fast reduction of blood water volume due to ultra-filtration via hemodialysis machine and critical threshold of blood water volume can result in clinical complications such as hypotension. When blood water volume reduces during hemodialysis process, the concentration of blood forming elements will increase. One of the methods for the monitoring of the concentration changes is ultrasonic speed m...
متن کاملSOLIDIFICATION MODELING AND DENDRITE STRUCTURE ANALYSIS IN A HORIZONTAL CONTINUOUSLY CAST BRASS BILLET
Abstract: The horizontal continuous casting process has received a significant attention for near net shape casting of non ferrous metals and alloys. Numerical Simulation has been widely used for process design and optimization of continuous casting process. In the present study, a 3-dimensional heat flow model was developed to simulate the heat transfer and solidification in a horizontal b...
متن کاملEffects of Ultrasonic Treatment during the Solidification Process on the Structure Formation of Low Carbon Steel
This paper studied effects of ultrasonic treatment during the solidification process on structure formation of low carbon steel. Results showed that with ultrasonic treatment grains were refined and the steel ingot avoided the cast widmanstatten structure. When ultrasonic treatment was employed, pearlite was broken and the average length of pearlite was decreased from 550mm to 140mm. The corres...
متن کاملMonitoring the Dimensional Changes of Castings in the Process of Solidification
The article deals with measurements of linear changes of castings from foliated graphite cast iron and Al-alloys during their solidification. For this purpose the measuring apparatus, which applies a dilatometer of Polish provenience, was built up. Dilatation curves of graphite cast iron and Al-alloys were acquired during the casting process. In the case of Al-alloys the influence of chemical c...
متن کامل