Spray cooling characteristics of nanofluids for electronic power devices
نویسندگان
چکیده
The performance of a single spray for electronic power devices using deionized (DI) water and pure silver (Ag) particles as well as multi-walled carbon nanotube (MCNT) particles, respectively, is studied herein. The tests are performed with a flat horizontal heated surface using a nozzle diameter of 0.5 mm with a definite nozzle-to-target surface distance of 25 mm. The effects of nanoparticle volume fraction and mass flow rate of the liquid on the surface heat flux, including critical heat flux (CHF), are explored. Both steady state and transient data are collected for the two-phase heat transfer coefficient, boiling curve/ cooling history, and the corresponding CHF. The heat transfer removal rate can reach up to 274 W/cm(2) with the corresponding CHF enhancement ratio of 2.4 for the Ag/water nanofluids present at a volume fraction of 0.0075% with a low mass flux of 11.9 × 10(-4) kg/cm(2)s.
منابع مشابه
Enhancement of Spray Cooling Heat Transfer Using Extended Surfaces and Nanofluids
Title of Dissertation: ENHANCEMENT OF SPRAY COOLING HEAT TRANSFER USING EXTENDED SURFACES AND NANOFLUIDS Johnathan Stuart Coursey, Ph.D., 2007 Directed By: Associate Professor, Jungho Kim, Department of Mechanical Engineering Spray cooling is a powerful heat transfer technique in which an atomizing nozzle provides a flow of liquid droplets directed towards a hot surface. This dissertation explo...
متن کاملNanofluids for thermal transport
challenges facing many diverse industries, including microelectronics, transportation, solid-state lighting, and manufacturing. Technological developments such as microelectronic devices with smaller (sub-100 nm) features and faster (multi-gigahertz) operating speeds, higher-power engines, and brighter optical devices are driving increased thermal loads, requiring advances in cooling. The conve...
متن کاملExperimental Investigation of the Alumina/Paraffin Thermal Conductivity Nanofluids with a New Correlated Equation on Effective Thermal Conductivity
Liquid paraffin as a coolant fluid can be applied in electronic devices as a result to its suitable capabilities such as electrical insulating, high heat capacity, chemical and thermal stability, and high boiling point. However, the poor thermal conductivity of paraffin has been confined its thermal cooling application. Addition of high conductor nanoparticles to paraffin can fix this drawback...
متن کاملNanofluids for Heat Transfer – Potential and Engineering Strategies
In an age of increasing heat fluxes and power loads in applications as diverse as power electronics, renewable energy, transportation, and medical equipment, liquid cooling systems are necessary to enhance heat dissipation, improve energy efficiency, and lengthen device lifetime. To satisfy these increasing thermal management needs, the heat transfer efficiency of conventional fluids must be im...
متن کاملAnalysis of Nanofluids in Liquid Electronic Cooling Systems
Nanofluids are solutions of a small fraction of suspended nanoparticles in a bulk fluid. Nanofluids have shown great promise as heat transfer fluids over typically used bulk fluids and fluids with micron sized particles. The nanoparticles do not settle in the fluid and do not cause clogging or damage to surfaces as with micron sized particles. In the current work we compare the performance of d...
متن کامل