Analysis of different drag Models for bubbling fluidized beds using CFD
نویسندگان
چکیده
منابع مشابه
3D Eulerian simulation of a gas-solid bubbling fluidized bed: assessment of drag coefficient correlations
Fluidized beds have been widely used in power generation and in the chemical, biochemical, and petroleum industries. The 3D simulation of commercial scale fluidized beds has been computationally impractical due to the required memory and processor speeds. However, in this study, 3D Computational Fluid Dynamics simulation of a gas-solid bubbling fluidized bed is performed to investigate the effe...
متن کاملCFD-DEM Investigation on van der Waals Force in Gas-Solid Bubbling Fluidized Beds
Effect of interparticle force on the hydrodynamics of gas-solid fluidized beds was investigated using the combined method of computational fluid dynamics and discrete element method (CFD-DEM). The cohesive force between particles was considered to follow the van der Waals equation form. The model was validated by experimental results from literature in terms of bed voidage distribution and Eule...
متن کاملComparison of 2-D and 3-D CFD simulations of bubbling fluidized beds with x-ray fluoroscopy and imaging experiments
Computational Fluid Dynamics (CFD) is a promising tool for the development of comprehensive models of gas-phase polymerization in fluidized bed reactors. However, CFD models of gas-solids flow in fluidized beds are still under development and validation of these models on relatively simple test cases is essential if we hope to achieve reliable predictions of the complex phenomena associated wit...
متن کاملExperimental Study of Effects of Particle Size Distribution on Bubble Behavior for Validation of Cfd Modeling of Bubbling Fluidized Bed
The efficiency of fluidized bed reactors depends on bubble distribution, bubble size and bubble velocity within the reactor. The sizes and size distributions of particles used in the bed may lead to different bubble behaviour. The objective of this work is to study the influence of particle size distribution on bubble behaviour. The results from the experiments will be used for validation of CF...
متن کاملAdapting Data Processing To Compare Model and Experiment Accurately: A Discrete Element Model and Magnetic Resonance Measurements of a 3D Cylindrical Fluidized Bed
Discrete element modeling is being used increasingly to simulate flow in fluidized beds. These models require complex measurement techniques to provide validation for the approximations inherent in the model. This paper introduces the idea of modeling the experiment to ensure that the validation is accurate. Specifically, a 3D, cylindrical gas-fluidized bed was simulated using a discrete elemen...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2004