The Mitral Valve Orifice Method for Noninvasive Two - dimensional Echo Doppler Determinations of Cardiac Output DANIEL

We developed and validated a mitral valve orifice method for Doppler cardiac output determination. In 15 open-chest dogs, cardiac output was controlled and measured by a roller pump interposed between the right atrium and pulmonary artery as a right-heart bypass. Left heart flows were measured in the open-chest dog model by Doppler measurements at the mitral valve orifice and compared not only to volume flow measured by the roller pump, but to electromagnetic flow meters as well. The maximum mitral valve orifice area was measured off short-axis two-dimensional echocardiographic views by planimetry. The maximal orifice was then adjusted for its diastolic variation in size by calculating a ratio of mean-to-maximal mitral valve separation on a derived M-mode echocardiogram. Flow was sampled parallel to mitral valve inflow in a four-chamber plane. The multiplication of mean flow throughout the cardiac cycle by the mean mitral valve area after correction for diastolic size variation yielded a cardiac output determination that could be compared to the roller pump measurement. Fifty-two cardiac output determinations over roller pump values of 1-5 1/min yielded a high correlation between roller pump flows and Doppler (r = 0.97 + 0.23 1/min). Our study shows that the mitral valve orifice provides an accurate site for Doppler cardiac output measurements.