Improved PID Friction Feed-forward Compensation Control Based on Segment Friction Model
نویسندگان
چکیده
An improved PID friction feed-forward compensation control based on segment friction model is presented for nonlinear friction perturbation problems of high precision optoelectronic tracking stable platform systems. From the view of engineering application, the friction characteristics of stable platform servo systems are considered, a simple and reasonable segment friction model is established, and a practical model for parameter identification is given. According to this model, improved PID friction feed-forward compensation control is designed. Through the feed-forward compensation, friction disturbance effect on system stability is reduced, and low-speed performance of the system is improved. By introducing the improved PID control, both integral saturation and peak jitter of system speed output are eliminated, and system control performance is improved. Finally, through the analysis and comparison of practical stable platform experiments, the rationality and effectiveness of the design method is proved.
منابع مشابه
A SELF-ORGANIZING FUZZY LOGIC CONTROL FOR FRICTION COMPENSATION IN FEED DRIVES - American Control Conference, Proceedings of the 1995
This paper introduces a new friction compensation strategy which utilizes a rule-based fuzzy logic controller whose parameters are self-tuned according to the previous performance of the controller and a friction model in the lowvelocity range. The proposed controller as well as a conventional fuzzy logic controller and a PID controller were simulated and implemented on a 3-axis milling machine...
متن کاملAdaptive Friction Compensation of Servo Mechanisms with Nonlinear Viscous Friction
In this paper, a SDOF system with nonlinear viscous friction under harmonic excitation is studied. A nonlinear viscous friction model is built as an exponential expansion of the relative slip velocity. According to the adaptive control theory, an adaptive controller for the friction compensation of the SDOF system with nonlinear viscous friction is put forward by using the model-based parameter...
متن کاملPassivity-Based Control of an Overhead Travelling Crane
In this paper, a passivity-based control scheme is proposed for the two main translational axes of an overhead crane to provide an active damping of crane load oscillations. The decentralised control structure consists of independent axis controllers, which are adapted to the varying rope length using gain-scheduling techniques. The tracking capabilities concerning desired trajectories for the ...
متن کاملSome Experiences of the use of Iterative Learning Control for Performance Improvement in Robot Control Systems
Some aspects of the use of learning control for improved performance in robot control systems are studied. The learning control signal is used in combination with conventional feedback and feed-forward control. The eeects of disturbances, unmodeled dynamics and friction are studied theoretically and in simulations of a simpliied model of a robot arm. Convergence and robustness aspects of the ch...
متن کاملExperimental Study on Low Velocity Friction Compensation and Tracking Control
Stick-slip phenomenon is often associated with the control of low velocity motion because of the positional dependancy of friction and negative damping friction that decreases as the motion speed increases. In this paper, smooth low velocity tracking control of a commercial robot joint is demonstrated experimentally using a combination of high gain PID control, fast sampling rate and high posit...
متن کامل