Dynamically Adaptive Mulitipoint to Point LSPs
نویسندگان
چکیده
Multi-Protocol Label Switching provides a flexible forwarding mechanism within communication networks. Since its inception at the end of the last century it has been recognised that multipoint-to-point label switched paths offer a valuable way of further simplifying the forwarding process particularly within IP networks. Whilst work has been carried out into schemes for the formulation of such multipoint-to-point LSPs, only a couple of schemes have been proposed. Furthermore resilience in such configurations has only been partially addressed. This paper describes an improved method for the formulation of multipoint-to-point LSPs. In addition, the new notion of Dynamically Adaptive Mulitipoint to Point LSPs is presented in order to address the issue of resilience.
منابع مشابه
Label Space Reduction in Multipoint-to-point LSPs for Traffic Engineering
Many ISPs use MPLS for traffic engineering to properly account for and utilize their resources. A fundamental problem in MPLS is to reduce the label space usage by label switched paths (LSPs), while meeting the requirements of the flows. While routing mechanisms have been proposed in context of minimizing point-to-point LSPs, the problem has not gained sufficient attention in context of multipo...
متن کاملRFC 4687 OAM Reqs for Point - to - Multipoint MPLS
Status of This Memo This memo provides information for the Internet community. It does not specify an Internet standard of any kind. Distribution of this memo is unlimited. Abstract Multi-Protocol Label Switching (MPLS) has been extended to encompass point-to-multipoint (P2MP) Label Switched Paths (LSPs). As with point-to-point MPLS LSPs, the requirement to detect, handle, and diagnose control ...
متن کاملNetwork Working Group S. Yasukawa Request for Comments: 4687 Ntt Corporation Category: Informational A. Farrel Old Dog Consulting Operations and Management (oam) Requirements for Point-to-multipoint Mpls Networks
Status of This Memo This memo provides information for the Internet community. It does not specify an Internet standard of any kind. Distribution of this memo is unlimited. Abstract Multi-Protocol Label Switching (MPLS) has been extended to encompass point-to-multipoint (P2MP) Label Switched Paths (LSPs). As with point-to-point MPLS LSPs, the requirement to detect, handle, and diagnose control ...
متن کاملA New Preemption Policy for DiffServ-Aware Traffic Engineering to Minimize Rerouting
In this paper, a new preemption policy is proposed and complemented with an adaptive scheme that aims to minimize rerouting. The preemption policy combines the three main optimization criteria: number of LSPs to be preempted, priority of LSPs to be preempted, and amount of bandwidth to be preempted. The preemption policy is complemented by an adaptive scheme that selects LSPs with lower priorit...
متن کاملTraffic Engineering Using Multiple Multipoint-to-Point LSPs
Traffic engineering aims to optimize the utilization of existing network resources for load balance and failure recovery, and these are to be accomplished in a scalable fashion. This paper proposes a traffic engineering scheme using multiple multipoint-to-point (m-t-p) Label Switched Paths (LSPs) which can reduce the number of LSPs and required labels in links. The scheme consists of m-t-p LSP ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2003