Experimental Evaluation of a Ranque- Hilsch Vortex Tube as a Particle Separator

نویسندگان

  • A. Burger
  • R. T. Dobson
چکیده

R & D Journal of the South African Institution of Mechanical Engineering 2012,28,25-30 http://www.saimeche.org.za (open access) © SAIMechE All rights reserved. 25 The Pebble Bed Modular Reactor (PBMR) is a Generation IV graphite-moderated helium cooled nuclear reactor developed in South Africa from the German Arbeitsgemeinschaft Versuchreaktor (AVR). After decommissioning of the AVR plant, radioactive isotopes of silver 44Ag 110 as well as graphite particles were found in the primary helium coolant loop of the reactor. Hence the main objective of this work was to evaluate the efficiency of the Ranque-Hilsch vortex tube (RHVT) as a separation device for removing graphite particles from a helium coolant stream. This objective was accomplished by designing and building an experimental test apparatus and measuring the particle separation efficiency of the RHVT under different operating conditions. It was found that the RHVT is a very efficient particle separator, which may, however, not easily be incorporated into the PBMR system.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Performance Evaluation of a Ranque-Hilsch Vortex Tube with Optimum Geometrical Dimensions

 A brass Vortex Tube (VT) with interchangeable parts is used to determine the optimum cold end orifice diameter, main tube length and diameter. Experim...

متن کامل

2D Numerical Simulation of a Micro Scale Ranque-Hilsch Vortex Tube

  In this study, fluid flow and energy separation in a micro-scale Ranque-HilschVortex Tube are numerically investigated. The flow is assumed as 2D, steady,compressible ideal gas, and shear-stress-transport SST k-W is found to be a bestchoice for modeling of turbulence phenomena. The results are in a good agreementwith the experimental results reported in the literature. The results show that f...

متن کامل

3D Velocimetry and droplet sizing in the Ranque–Hilsch vortex tube

The Ranque–Hilsch vortex tube (RHVT) is a device currently used to generate local cooling. In general, the fluid that is injected into the RHVT is a single-phase gas. In this study, however, we have added a dispersed phase (water droplets) to the gas (nitrogen). By means of phase Doppler particle analysis, three velocity components, their higher order moments, and sizes of droplets were measure...

متن کامل

Maxwell's demon in the Ranque-Hilsch vortex tube.

A theory was developed that explains energy separation in a vortex tube, known as one of the Maxwellian demons. It appears that there is a unique relation between the pressures in the exits of the vortex tube and its temperatures. Experimental results show that the computed and measured temperatures are in very good agreement.

متن کامل

Optimization of Low Pressure Vortex Tube via Different Axial Angles of Injection Nozzles

In this article, a Ranque–Hilsch Vortex Tube has been optimized utilizing axial angles for nozzles. Effect of nozzles angles on the flow behavior has been investigated by computational fluid dynamics (CFD) techniques. A finite volume approach with the standard k–ε turbulence model has been used to carry out all the computations. The dimensions of studied vortex tubes are kept the same for all m...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2013