impact resistance and optimization of metal-composite-metal auto body panel using response surface methodology (rsm)

Authors

sadegh rahmati

j marzbanrad

h.r. khalili

abstract

the impact resistance of new lightweight panel is studied. this panel consists of two thin metal layers bonded together by intermediate fiber/epoxy layers (mcm-sheets). to simulate a behavior of this kind of impact problem, explicit and implicit finite element software abaqus is used. in order to validate the finite element modeling, these results have been compared with experimental test results. the response surface method (rsm) is applied to minimize the dent depth and panel mass. after optimization of panel, the panel with optimum dimension is compared to uniform panels in different stuff. however, the mcm-panel displays a larger dent resistance and less mass than the aluminium and the steel panels.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

Prediction and Optimization of Mechanical Properties of St52 in Gas Metal Arc Weld Using Response Surface Methodology and ANOVA

Many researchers have developed algorithms to predict welding parameters. The variety of welding types is broad because the confine mixture of pressure and temperature could be selected. This paper introduces a response surface methodology (RSM) for optimization and prediction of the influence of Ar and CO2 gases and electrical current on tensile strength of St52’s gas metal arc weld (GMAW) lin...

full text

Optimization of Biodiesel Production from Castor Oil Using a Microwave Via Response Surface Methodology (RSM)

The purpose of this research work was to investigate the optimum operating conditions for biodiesel production from castor oil using a microwave. The Box–Behnken design of experiment was carried out using the Design Expert 7. A response surface methodology (RSM) was used to analyze the influence of the process variables (molar ratio of methanol to castor oil, catalyst concentration, reaction ti...

full text

preparation and characterization of new co-fe and fe-mn nano catalysts using resol phenolic resin and response surface methodology study for fischer-tropsch synthesis

کاتالیزورهای co-fe-resol/sio2و fe-mn-resol/sio2 با استفاده از روش ساده و ارزان قیمت همرسوبی تهیه شدند. از رزین پلیمری resol در فرآیند تهیه کاتالیزور استفاده شد.

Photocatalytic Removal of Amaranth Optimization Using Response Surface Methodology

Since Amaranth (AM) is one of the dye compounds which is harmful to human’s life its removal from industrial waste water would reduce their environmental impact and health effect. Copper nanoparticle (CuNP) is a simple and eco-friendly material which can be used to remove this pollutant. In this paper, copper nanoparticles were synthesized, for removal of AM dye. The experiments were designed b...

full text

Optimization of Formulation in Dietary Gaz Fortified with Stevioside and Ganoderma locidum using Response Surface Methodology (RSM)

Background and Objectives: Nowadays, production and consumption of functional and dietary foods have increased. Since carbohydrates are one of the most important sources of increasing daily calories, food industries are focused on decreasing use of this important source and replacing it with non-calorie sweeteners. This objective of this study was to decrease sugar quantities in Gaz production,...

full text

Optimization of Struvite Crystallization and Heavy Metal Recovery in Wastewater Using Response Surface Methodology

In this study, the recovery of heavy metal (Cu2+, Pb2+, and Zn2+) concentrations and the yield of struvite from MAP precipitation in the wastewater were optimized by SRM (surface response methodology). Struvite was a major mineral precipitated with an impurity of sylvite (KCl) as confirmed by the XRPD Rietveld method, and struvite crystal has a prism-like shape morphology according to the SEM/E...

full text

My Resources

Save resource for easier access later


Journal title:
international journal of advanced design and manufacturing technology

جلد ۳، شماره ۴، صفحات ۳۷-۴۴

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023