Evaluation Low Cost Adsorbent of Walnut Bark Granule for Methylene Blue Dye Removal from Aqueous Environments

Authors

  • Abdollah Dargahi Department of Environmental Health Engineering, School of Public Health, Ardabil University of Medical Sciences, Ardabil, Iran.
  • Ahmad Reza Yari Research Center for Environmental Pollutants, Qom University of Medical Sciences, Qom, Iran.
  • Farhad Amirian
  • Ghobad Ahmadidoust
  • Mitra Mohammadi
Abstract:

Background & Aims of the Study: Methylene blue (MB) is a risk for human and environment. Adsorption process is one of the removal mechanisms of MB. The purpose of this research was the evaluation of low cost adsorbent of walnut bark granule for MB dye removal from aqueous environments. Materials & Methods: In this experimental research, the effect of various operating parameters such as dose of dye (100-500 mg/L), contact time (10-50 min), adsorbent dosage (1-5 g/L) and pH (3-8) was investigated. Color concentration was measured by spectrophotometer (Shimadzu Model UV-120-02) at 663 nm wavelength and pH was analyzed through pH meter (Digimed model DM-20, Digicron AnaliticaLtda, Sao Paulo, Brazil). Results: The findings of this research were showed that the walnut bark granule was able to remove up to 41% of MB dye (100 mg/L) from solutions at initial pH 7. Removal efficiency was increased by adsorbent dosage and contact time. MB concentration has a reverse effect on removal. Also, the equilibrium data were also fitted to the Freundlich equilibrium isotherm model (R2=0.95). Conclusions: Present study showed that use of walnut bark granule, as an absorbent, could be utilized in methylene blue removal. Therefore, considering the production wastes of this compound, utilization the essence of this substance as inexpensive absorbent with inexpensive and available raw material is clear.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

Removal of Methylene Blue Dye from Aqueous Solution by Adsorption Using Low Cost Adsorbent Obtained from Andrographis paniculata LEAVES

The objective of this work is to study the removal of methylene blue dye from aqueous solution using low cost adsorbent obtained from the leaves of Andrographis paniculata. Batch adsorption studies were carried out by observing the effects of various experimental parameters, such as dye concentration, contact time, adsorbent dose, effect of temperature and pH. The data were fitted into the Lang...

full text

The Application of Low-Cost Adsorbent for Reactive Blue 19 Dye Removal from Aqueous Solution: Lemna Minor

Background & Aims of the Study: Due to widespread use and adverse effect of dyes, the removal of dyes from effluents is necessary. This study was aimed to remove the reactive blue 19 dye removal from aqueous solution by dried Lemna minor. Materials and Methods:  The effect of various parameters including contact time, solution pH, adsorbent dosage and dye concentrati...

full text

Removal of Basic Blue 159 from Aqueous Solution Using Banana Peel as a Low-Cost Adsorbent

In this paper, the adsorption of Basic Blue159 (BB159) onto banana peel as a low-cost material was studied. At first, the banana peel was sieved. Later, banana peel particles were characterized by field emission scanning electron microscopy (FESEM), energy dispersive x-ray spectroscopy (EDXS) and Fourier Transform Infrared (FTIR) techniques. Batch adsorption experiments were carried out as a fu...

full text

Sawdust as a natural and low cost adsorbent for the removal of brilliant cresyl blue dye from water samples

Sawdust which is the main waste from wood industry has been used as a raw material forremoval of Brilliant Cresyl Blue toxic dye. The effects of various parameters such as pH,electrolyte concentration, adsorbent dose, contact time and agitation rate were studied for theremoval of the dye in a concentration of 50 mg L-1. The optimum condition for the studiedparameters was applied for various con...

full text

Removal of methylene blue dye aqueous solution using photocatalysis

The nano sized TiO2 and ZnO are the most active photocatalysts.  Methylene blue was used as a reference molecule for the photocatalytic degradation. The TiO2 and ZnO can totally remove methylene blue dye. The effect of various process parameters like initial concentration, contact time, dose of catalyst and pH on the extent of removal of dye by photocatalysis in presence o...

full text

Removal of methylene blue dye aqueous solution using photocatalysis

The nano sized TiO2 and ZnO are the most active photocatalysts.  Methylene blue was used as a reference molecule for the photocatalytic degradation. The TiO2 and ZnO can totally remove methylene blue dye. The effect of various process parameters like initial concentration, contact time, dose of catalyst and pH on the extent of removal of dye by photocatalysis in presence o...

full text

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 7  issue 2

pages  112- 117

publication date 2018-03

By following a journal you will be notified via email when a new issue of this journal is published.

Keywords

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023