بررسی اثر لایه اپک ‌پرسلن بر ترمودینامیک Resin Bonded Bridge به روش Finite Element Analysis

نویسندگان

  • نیک زادجمنانی سکینه خاتون
  • علایی فرامرز,
  • نیک زادجمنانی سکینه خاتون,
چکیده مقاله:

با توجه به تغییرات حرارتی محیط دهان تا 80 درجه سانتی‌ گراد نیز گزارش شده است احتمال تخریب رستوریشن‌های موجود در دهان و Debonding بریج‌های رزین باند به دلیل تفاوت در خواص حرارتی فلزات و نسوج مختلف دندان وجود دارد.با گذاشتن لایه اپک پرسلن روی بالچه فلزی بریج‌های رزین باند می‌توان انتظار استرس‌های حرارتی و استرین ناشی از آن تعدیل گردد. با استفاده از روش آنالیز اجزا محدود (Finite Element Analysis) نحوه انتقال حرارت در سیستم بریج‌های رزین باند و استرس حرارتی و استرین ناشی از آن در سه درجه حرارت صفر، 15 و 55 درجه در عرض دو ثانویه مورد بررسی قرار گرفت. نتایج حاصل از این بررسی نشان داد که: سرد کردن سیستم اثر مخربتری نسبت به شرایط گرم کردن آن دارد و وجود اپک پرسلن در رینتر بریج‌های رزین باند موجب کاهش انتقال به سمنان و مینای زیر رستورریشن گشته و با تعدیل استرس حرارتی در سیستم می‌تواند Debonding این نوع بریجها را کاهش دهد.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Three-Dimensional Finite Element Analysis of Anterior Two-Unit Cantilever Resin-Bonded Fixed Dental Prostheses

The aim of this study was to evaluate the influence of different framework materials on biomechanical behaviour of anterior two-unit cantilever resin-bonded fixed dental prostheses (RBFDPs). A three-dimensional finite element model of a two-unit cantilever RBFDP replacing a maxillary lateral incisor was created. Five framework materials were evaluated: direct fibre-reinforced composite (FRC-Z25...

متن کامل

Resin-bonded Bridge: Conservative Treatment Option for Single Tooth Replacement

Copyright: © 2013 Mittal S, et al. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited. Abstract Resin-Bonded Fixed Partial Dentures (RBFPD) was introduced to dentistry around 40 years ago. The typical design of re...

متن کامل

finite element analysis of ips empress ii ceramic bridge reinforced by zirconia bar.

the aim of this study was to determine the effect of trenched zirconia bar on the von mises stress distribution of ips -empress ii core ceramics.the three-dimensional model including a three-unit bridge from the second premolar to the second molar was designed. the model was reinforced with zirconia bar (zb), zirconia bar with vertical trench (vzb) and zirconia bar with horizontal trench (hzb) ...

متن کامل

بررسی اثر Platform Switching در توزیع تنش‌های استخوان کرستال اطراف ایمپلنت‌های دندانی 3iبه روش FEA) Finite Element Analysis)

سابقه و هدف: در سال‌های اخیر نظریه Platform Switching با استفاده از اجزای پروتزی با قطر کمتر از گردن ایمپلنت، به منظور کاهش تحلیل استخوان کرستال اطراف ایمپلنت‌های دندانی ارائه شده است. برخی از محققین معتقدند که با کمک این طراحی می‌توان تجمع تنش را در اینترفیس استخوان- ایمپلنت کاهش داد. بنابراین هدف از مطالعه حاضر بررسی و مقایسه تنش‌ها در اینترفیس استخوان کرستال-ایمپلنت و نیز اینترفیس ایمپلنت- ا...

متن کامل

Simulations of thermoelastic triangular cell lattices with bonded joints by finite element analysis

Thermoelastic triangular cell lattices composed of bi-material curved ribs were designed and analyzed by finite element simulation. Positive, negative, or zero thermal expansion was possible by varying rib curvature if joints can pivot freely, as expected. Welded or bonded joints result in nonzero expansion but smaller in magnitude than that of a constituent material having higher thermal expan...

متن کامل

The Fuzzy Finite Element Stress Analysis of Adhesive-Bonded Single Lap Joints

An adhesive-bonded single lap joint is analyzed using a new fuzzy finite element model. In the model, Young’s moduli and Poisson’s ratios of the joint materials are taken as fuzzy numbers in order to take the uncertainty of the material properties into account. The fuzzy numbers are modeled using linear triangular membership functions. At a selected material point in the adhesive layer, the pos...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 18  شماره None

صفحات  9- 15

تاریخ انتشار 2000-12

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

کلمات کلیدی

کلمات کلیدی برای این مقاله ارائه نشده است

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023