A new approach for assessing stability of rock slopes considering centroids of weak zones
نویسندگان
چکیده مقاله:
The intersection lines between discontinuity surfaces and their intersection points on the visible surfaces of any engineering structure may be the instability indicators. This paper describes a new approach to modelling the intersecting lines and points that would provide the first evaluation of any instability in an engineering structure characterized by the failure modes. In this work, the intersection lines were grouped according to their direction either in the reverse or in the same direction as the dip of the slope. Furthermore, the intersection lines are grouped according to various ranges of the interior friction angle, which can be selected by the users in a computer application developed for this work. The orientation of the intersecting lines and the location of the exposed intersection points are defined and assigned as the scatter points. These exposed points are clustered to determine the centroid locations. The K-means clustering is used in this step. Finally, all these analyses are integrated in a logical order, and the results obtained are used to assess the instabilities on the slope surface. Experiments are carried out on a rock cut along the Konya-Antalya (Turkey) highway, which is composed of limestone, to demonstrate the performance and results of the approach. The locations of the possible failure zones in the critical range of the interior friction angle are defined both visually and numerically along the slope. Experiments show that the proposed method is very useful and easy to implement and yields practical preliminary evaluation results pertaining to instabilities according to the basic failure modes.
منابع مشابه
Effects of Weak Layer Angle and Thickness on the Stability of Rock Slopes
This paper researches two key factors (angle and thickness) of a weak layer in relation to their influencing mechanism on slope stability. It puts forward the sliding surface angle and morphological model criteria for the control of rock slopes and realization of its failure mechanism. By comparing the Failure Modes and Safety Factors (Fs) obtained from numerical analysis, the influence pattern...
متن کاملa new approach to credibility premium for zero-inflated poisson models for panel data
هدف اصلی از این تحقیق به دست آوردن و مقایسه حق بیمه باورمندی در مدل های شمارشی گزارش نشده برای داده های طولی می باشد. در این تحقیق حق بیمه های پبش گویی بر اساس توابع ضرر مربع خطا و نمایی محاسبه شده و با هم مقایسه می شود. تمایل به گرفتن پاداش و جایزه یکی از دلایل مهم برای گزارش ندادن تصادفات می باشد و افراد برای استفاده از تخفیف اغلب از گزارش تصادفات با هزینه پائین خودداری می کنند، در این تحقیق ...
15 صفحه اولthe use of appropriate madm model for ranking the vendors of mci equipments using fuzzy approach
abstract nowadays, the science of decision making has been paid to more attention due to the complexity of the problems of suppliers selection. as known, one of the efficient tools in economic and human resources development is the extension of communication networks in developing countries. so, the proper selection of suppliers of tc equipments is of concern very much. in this study, a ...
15 صفحه اولTime-dependent system reliability of anchored rock slopes considering rock bolt corrosion effect
متن کامل
Stability of rock slopes in Valles Marineris, Mars
[1] New slope measurements from the Mars Orbiter Laser Altimeter (MOLA), in conjunction with the Rock Mass Rating system (RMR), permit inversions of slope height and angle from wallrock and interior deposits within Valles Marineris troughs for strength and lithology. Wallrock (50 < RMR < 65) is stronger than interior deposits (30 < RMR < 55). These values are consistent with layered igneous roc...
متن کاملA new approach for application of rock mass classification on rock slope stability assessment
The objective of this paper is to present a new rock mass classification system which can be appropriate for rock slope stability assessment. In this paper an evaluation model based on combining the Analytic Hierarchy Process (AHP) and the Fuzzy Delphi method (FDM)was presented for assessing slope rockmass quality estimates. This research treats the slope rockmass classification as a group deci...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ذخیره در منابع من قبلا به منابع من ذحیره شده{@ msg_add @}
عنوان ژورنال
دوره 9 شماره 1
صفحات 1- 18
تاریخ انتشار 2018-01-01
با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023