Concentration Evaluation and Health Risk Assessment of Welders' Exposure to Total Fumes and Manganese during Welding at Metal Industry

نویسندگان

  • Babanezhad, Esmaeil Department of Environmental Health, Mazandaran University of Medical Sciences, Sari, Iran
  • Esfandiari, Yahya Department of Environmental Health Engineering, Health Science Research Center, Mazandaran University of Medical Sciences, Sari, Iran
  • Mohammadian, Mahmud Health Science Research Center, Addiction Research Institute, Mazandaran University of Medical Sciences, Sari, Iran
  • Ramzani, Solale Student Research Committee, Mazandaran University of Medical Sciences, Sari, Iran
چکیده مقاله:

Introduction and purpose: Risk assessment of toxic or hazardous chemicals enables industrial hygienists to make appropriate decisions regarding management provisions in a healthy workplace. Exposure to total fumes and manganese during welding can have harmful effects on welders’ health. Therefore, the present study was conducted in the metal industry to evaluate the concentration and determine the risk of welders’ exposure to total fumes and manganese in 2018. Methods: In this descriptive-analytical and cross-sectional study, welding fumes were sampled in the breathing zone of 35 welders using filters and cyclones moreover, the concentration of fumes was determined by a weight method. The samples were analyzed according to NIOSH 7301 method using an Inductively Coupled Plasma-Optical Emission Spectrometry to determine the manganese concentration in the fume. Moreover, health exposure risk assessment of workers exposed to welding fumes was performed using the recommended method by the Singapore Health and Safety Association method. The data were analyzed in MINITAB software (version 17). A p-value less than 0.05 was considered statistically significant.    Results: The mean concentrations of total fumes and manganese produced in Shielded Metal Arc were 9.56±1.67 and 0.45±0.08 mg/m-3, respectively. These values are about 2 and 22 times higher than the recommended occupational threshold limit for total fumes and manganese according to the American Conference of Governmental Industrial Hygienists, respectively. The risk assessment results showed that the mean values of exposure to total and manganese fume for the welders were moderate and high, respectively. Conclusion: Due to the high level of welders’ exposure to manganese during welding in the metal industry, preventive measures, such as engineering and management control techniques are recommended to reduce exposure to these fumes.  

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Exploring the risk of welders’ exposure to the gases and metal fumes in a shipbuilding industry: a case study

Introduction: Risk identification and investigation is an appropriate and practical approach for the occupational health professionals. This paper aims to determine exposure to the gases and metal fumes and to perform risk analysis in three common types of welding activities in a shipbuilding industry. Material and method: This analytical cross-sectional study was conducted in a shipbuilding i...

متن کامل

Designing, Constructing and Installing a Local Exhaust Ventilation System to Minimize Welders\' Exposure to Welding Fumes

Background & Aims of the Study: Welder’s exposure to welding fumes can cause occupational diseases. The current study sought to examine exposure to welding fumes among welders who work in the repair shop of Sarcheshmeh Copper Complex and design a local exhaust ventilation system to control exposure to welding fumes. Materials & Methods: This applied analytical study was co...

متن کامل

Occupational exposure to welding gases during three welding processes and risk assessment by SQRCA method

Background: Hazardous chemical agents in the welding operation are a mixture of metal fumes and toxic gases, the inhalation of which causes adverse health effects among welders. The emission of gases in the workplace is a logical cause for concern regarding the potential development of respiratory disease. The aim of the present study was to determine the concentration values of gases discharge...

متن کامل

Alteration of serum concentrations of manganese, iron, ferritin, and transferrin receptor following exposure to welding fumes among career welders.

This study was performed to determine airborne manganese levels during welding practice and to establish the relationship between long-term, low-level exposure to manganese and altered serum concentrations of manganese, iron, and proteins associated with iron metabolism in career welders. Ninety-seven welders (average age of 36 years) who have engaged in electric arc weld in a vehicle manufactu...

متن کامل

Occupational exposure to manganese-containing welding fumes and pulmonary function indices among natural gas transmission pipeline welders.

OBJECTIVES The objectives of this study were to evaluate manganese (Mn)-containing welding fumes' exposure, assess urinary Mn as a biomarker for Mn exposure and investigate the correlation of Mn in air, total fumes and urinary Mn with pulmonary function indices in 118 welders and 37 unexposed controls from two regions in Iran, Assaluyeh and Borujen. METHODS Air samples were collected on mixed...

متن کامل

RELATIONSHIP BETWEEN CONCENTRATION OF WELDING FUMES AND CHANGES IN WELDERS\' LUNG FUNCTIONS

In order to evaluate the relationship between the concentration of welding fumes and cigarette smoke on the bronchopulmonary system function, a comparative study of spirometric measurements in 100 welders and 50 healthy volunteers was performed in an automobile manufacturing company. Two groups of workers were matched according to their age, height, smoking habit, years of service and soci...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 5  شماره 4

صفحات  45- 56

تاریخ انتشار 2020-02

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

کلمات کلیدی

کلمات کلیدی برای این مقاله ارائه نشده است

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023