Effect of electrode erosion on the required ignition voltage of spark plug in CNG spark ignition engine

نویسندگان

  • F. Ommi
  • S. Javan
  • S.S. Alaviyoun
  • S.V. Hosseini
چکیده مقاله:

In this article, the electrode erosion and the gap growth of spark plugs were measured on of a CNG fueled engine after durability tests. Then, the required ignition voltage and the spark quality were investigated by a spark plug test rig. Considering results of measurements, the gap growth increased as the running time increased. Thus, the gap growth of spark plugs with 200 and 280 hours running time were 2 and 4.4 times more than the gap growth of spark plugs with 80 hours running time. Results of the voltage test show that the required voltage is increased with the pressure. The required voltage at 9 bar was 2 times higher than 1 bar. The increase of the required voltage and the adverse effect on the spark quality due to the gap growth are due to more running time. Accordingly, the required voltage was increased 11% at 5 bar while the gap growth was 20%. Comparing results of new and used spark plugs showed that in addition to the gap growth, deposits on the electrodes surface could lead to increase the required voltage.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Improved efficiency of CNG using hydrogen in spark ignition engine

Experimental investigations carried out on a single-cylinder four-stroke motorcycle spark ignition engine operating on gasoline and natural gas are reported in the present paper when compressed natural gas (CNG) and hydrogen were used as fuel. The investigations were carried out by mixing a small percentage of hydrogen (5 to 30%) with CNG and supplied to the engine. Hydrogen and CNG were mixed ...

متن کامل

The Effect of Ignition Timing on Methanol Blended Spark Ignition Engine

The objective of the present work is to evaluate whether variable ignition timing can be effect on exhaust emission and engine performance of a spark ignition engine. The study describes some results of research in the area of spark ignition engine and is assessed by studying its performance and emission characteristics relative to that of conventional ignition engine using gasoline and methano...

متن کامل

An Experimental Investigation of Spark Plug Temperature in Bi-fuel Engine and Its Effect on Electrode Erosion

Temperature is one of the effective parameters in erosion of spark plug electrodes. In this research, temperature of spark plug was measured in engine's different operation conditions with two types of fuels: compressed natural gas and gasoline. Test results showed that, temperature of center electrode is lower than ground electrode and maximum difference between them is 110ºC that occurs at...

متن کامل

Nonperiodic oscillations of Pressure in a SPARK Ignition Combustion Engine

We report our results on non-periodic experimental time series of pressure in a spark ignition engine. The experiments were performed for a low rotational velocity of a crankshaft and a relatively large spark advance angle. We show that the combustion process has many chaotic features. Surprisingly, the reconstructed attractor has a characteristic butterfly shape similar to a chaotic attractor ...

متن کامل

Modeling and Simulation of Aviation Engine Ignition Spark Frequency Disorder

Igniter is an important part of aircraft engine, which should be reliable to ensure safety. Spark frequency disorder is common fault to the aviation ignition device, and it is great hidden danger to the aircraft engine. To guarantee the safety and reliability of aviation igniter, the fault mechanism of the aviation ignition spark frequency disorder is researched in this paper. The factors which...

متن کامل

Cylinder Pressure in a Spark - Ignition Engine : A Computational Model

an s-curve to describe the gradual transition between exhaust pressure and intake or inlet pressure. The start of compression, which marks the end of the intake process, does not necessarily occur at the same time as the close of the intake valve (IVC). The intake valve closes after bottom center (BC) while the volume in the cylinder is decreasing. The engine speed determines the point at which...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 26  شماره 26

صفحات  31- 39

تاریخ انتشار 2012-04

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

کلمات کلیدی

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023