Fracture Analysis of Externally Semi-Elliptical Crack in a Spherical Pressure Vessel with Hoop-Wrapped Composite

نویسندگان

  • F Mirzade Abadan Institute of Technology, Petroleum University of Technology, Abadan, Iran
  • Gh Rashed Abadan Institute of Technology, Petroleum University of Technology, Abadan, Iran
  • H Eskandari Abadan Institute of Technology, Petroleum University of Technology, Abadan, Iran
چکیده مقاله:

In this paper the effect of composite hoop-wrapped on stress intensity factor for semi-elliptical external crack which located in spherical pressure vessel, were investigated through the Finite Element Analysis. In order to find the effect of some parameters such as composite thickness and width, internal pressure and crack geometry, comparisons between different cases were done and discussed in detail. The result show that repairing crack with composite hoop-wrapped, can significantly reduce the stress intensity factor along the crack front. 

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Three-Dimensional Finite Element Analysis of Stress Intensity Factors in a Spherical Pressure Vessel with Functionally Graded Coating

This research pertains to the three-dimensional (3D) finite element analysis (FEA) of the stress intensity factors (SIFs) along the crack front in a spherical pressure vessel coated with functionally graded material (FGM). The vessel is subjected to internal pressure and thermal gradient. The exponential function is adopted for property of FGMs. SIFs are obtained for a wide variety of crack sha...

متن کامل

Semi Analytical Analysis of FGM Thick-Walled Cylindrical Pressure Vessel with Longitudinal Variation of Elastic Modulus under Internal Pressure

In this paper, a numerical analysis of stresses and displacements in FGM thick-walled cylindrical pressure vessel under internal pressure has been presented. The elastic modulus is assumed to be varying along the longitude of the pressure vessel with an exponential function continuously. The Poisson’s ratio is assumed to be constant. Whereas most of the previous studies about FGM thick-walled p...

متن کامل

Fatigue Life Prediction of a Hoop-Wrapped Composite CNG Cylinder Containing Surface Flaw

In recent years many experimental and numerical studies have been conducted on the fatigue behaviour of CNG storage pressure vessels. The main objective of these studies is to estimate the total fatigue life, which consists of two parts: i) Life till crack nucleation and ii) Crack growth life. Although fatigue evaluation methods for metal cylinders are widely covered in literature including the...

متن کامل

Numerical Simulation of Semi-Elliptical Axial Crack in Pipe Bend Using XFEM

In this work, XFEM is employed to obtain the stress intensity factors (SIFs) of a semi elliptical part through thickness axial crack. In XFEM, additional functions are employed to enrich the displacement approximation using partition of unity approach. Level set functions are approximated using higher order shape functions in the crack front elements to ensure the accurate modeling of the crack...

متن کامل

a swot analysis of the english program of a bilingual school in iran

با توجه به جایگاه زبان انگلیسی به عنوان زبانی بین المللی و با در نظر گرفتن این واقعیت که دولت ها و مسئولان آموزش و پرورش در سراسر جهان در حال حاضر احساس نیاز به ایجاد موقعیتی برای کودکان جهت یاد گیری زبان انگلیسی درسنین پایین در مدارس دو زبانه می کنند، تحقیق حاضر با استفاده از مدل swot (قوت ها، ضعف ها، فرصتها و تهدیدها) سعی در ارزیابی مدرسه ای دو زبانه در ایران را دارد. جهت انجام این تحقیق در م...

15 صفحه اول

Part A- Experimental: Experimental Analysis of Crack Propagation in Pre-stressed Concrete Sleepers by Fracture Mechanics

This study investigates propagation of mode I crack in B70 pre-stressed concrete sleepers by fracture mechanics approach. A new experimental analysis is done for notched B70 pre-stressed concrete sleepers with Replica test and image analysis. A scanning electron microscope test (SEM) and an image analysis are applied for the Replica test in order to determine crack length and crack mouth openin...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 10  شماره 2

صفحات  263- 270

تاریخ انتشار 2018-06-30

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023