Mass Transfer Mechanism and Mathematical Model for Extraction Process of L-Theanine across Bulk Liquid Membrane

نویسندگان

  • Huang Du-shu College of Science, Honghe University, Yunnan 661100, CHINA
  • Huang Zhao-long College of Science, Honghe University, Yunnan 661100, CHINA
  • Li Zi-jin College of Science, Honghe University, Yunnan 661100, CHINA
  • Yi Ping, College of Science, Honghe University, Yunnan 661100, CHINA
  • Yi Zhong-zhou, College of Science, Honghe University, Yunnan 661100, CHINA
چکیده مقاله:

This paper deals with the extraction of L-Theanine containing Aliquat 336 as a carrier and cyclohexane as solvent across bulk liquid membrane. The optimum operation condition are as follows: extraction time of 150 min, initial concentration of theanine in the feed phase is 1.8 g/L, the carrier concentration is 0.5 M, the ion of the receiving phase is 0.2 M NaCl of Na2HPO4-NaH2PO4 buffer solution. A mathematical model of transport process was deduced, the forward interfacial reaction rate constants and the backward interfacial reaction rate constants between the feed phase and the membrane phase, the receiving phase and the membrane phase were taken into account in the model equations. Using the experimental results, several parameters of the proposed model have been achieved by a nonlinear fitting method.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

mass transfer mechanism and mathematical model for extraction process of l-theanine across bulk liquid membrane

this paper deals with the extraction of l-theanine containing aliquat 336 as a carrier and cyclohexane as solvent across bulk liquid membrane. the optimum operation condition are as follows: extraction time of 150 min, initial concentration of theanine in the feed phase is 1.8 g/l, the carrier concentration is 0.5 m, the ion of the receiving phase is 0.2 m nacl of na2hpo4-nah2po4 buffer solutio...

متن کامل

Mathematical model for mass transfer coefficient determination in dissolution process

Mathematical models play an essential role in simulation of dynamic processes as they provide insights into the description and behaviour of real systems. Models of chemical processes are derived from laws of conservation, thermodynamic, and control design. In the present paper, we study the modelling of dissolution process determining the quasi steady state material balance for velocity profil...

متن کامل

Investigation of Mass Transfer Coefficient under Jetting Conditions in a Liquid-Liquid Extraction System

In this research mass transfer coefficient under jetting regime in different directions (from dispersed to continuous and continuous to dispersed phase) has been studied using an experimental setup. n-Butanol-succinic acid-water with low interfacial tension has been selected as experimental chemical system. The effects of various parameters such as jet velocity, nozzle diameter and the heig...

متن کامل

Comparative Study of Liquid –Liquid Extraction and Bulk Liquid Membrane for Rhodamine B

In the liquid liquid extraction (LLE) the extraction of rhodamine B (RB) from aqueous solutions by using 0.8M phenol in xylene was studied. The influencing parameters such as the effect of pH of the aqueous phase, the effect of extractant concentration, the effect of diluents and the stripping reagents has been investigated. The maximum extraction efficiency was obtained at pH 1±0.1 and the max...

متن کامل

Mathematical Modeling of Heat Transfer for Steel Continuous Casting Process

     Heat transfer mechanisms and the solidification process are simulated for a continuous casting machine and the geometric shape of the liquid pool is predicted considering different conditions. A heat transfer and solidification model is described for the continuous casting of steel slabs. The model has been established on the basis of the technical conditions of the slab caster in the con...

متن کامل

D2EHPA-Sulfuric Acid System for Simultaneous Extraction and Recovery of Nickel Ions via Supported Liquid Membrane Process

This research addresses the extraction and recovery of nickel ions from real electroplating wastewater using SLM process. The process involves three main phase system which are feed, organic and stripping phase. The feed phase containing the nickel electroplating wastewater whereas the organic phase containing the liquid membrane which was immobilized in the membrane support. The liquid membran...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 31  شماره 2

صفحات  53- 58

تاریخ انتشار 2012-06-01

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023