MICROSTRUCTURE AND MECHANICAL PROPERTIES OF THE ULTRAFINE-GRAINED COPPER TUBE PRODUCED BY SEVERE PLASTIC DEFORMATION

Nano- and Micro-mechanical Properties of Ultrafine-Grained Materials Processed by Severe Plastic Deformation Techniques

The processing of metals through the application of severe plastic deformation (SPD) techniques provides the potential for achieving exceptional grain refinement leading to ultrafine-grained (UFG) materials in bulk solids. These materials generally exhibit high strength but very limited ductility at room temperature (RT) leading to the so-called paradox of strength and ductility. The recent dev...

THE EFFECT OF SEVERE PLASTIC DEFORMATION ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF AS-CAST AZ31

The evolution of microstructure and mechanical properties of a magnesium cast alloy (AZ31) processed by equal channel angular pressing (ECAP) at two different temperatures were investigated. The as-cast alloy with an average grain size of 360  was significantly refined to about 5  after four ECAP passes at 543 K. Grain refinement was achieved through dynamic recrystallization (DRX) du...

Mechanical Properties of Copper Processed by Severe Plastic Deformation

EBSD characterization of nano/ultrafine structured Al/Brass composite produced by severe plastic deformation

In the present work, nano/ultrafine structured Al/Brass composite was produced by accumulative roll bonding (ARB) up to eight cycles. The evolution of grain refinement and deformation texture and their effect on the mechanical properties were investigated. It was observed that by increasing the ARB cycles, due to the difference in flow properties of the metal constituents, brass layers necked, ...

Thermodynamics and kinetics of grain boundaries in ultra fine grained copper produced by severe plastic deformation

1 List of symbols and abbreviations 3 Chapter 1: INTRODUCTION 6 Chapter 2: LITERATURE SURVEY 8 2.1: The essence of ultra fine grained materials 8 2.2: Severe plastic deformation: a method for producing UFG microstructure 11 2.3: Physical properties of materials derived from GB character 15 2.4: Non-equilibrium GBs: theoretical aspects 16 2.4.1: Conventional models for GB structure 16 2.4.2: Mod...

Investigation of microstructure and mechanical properties of low carbon steel sheets after severe plastic deformation in corrugation dies

Recently, bulk nano-structured materials produced by severe plastic deformation (SPD) have attracted scientists attention.  Materials produced by SPD are of great importance because of (1) non-porous structure, (2) great mechanical properties such as high strength and toughness and (3) proper dimension for mechanical and physical testing.  Several methods have been introduced for imposing the s...