Microstructure, in Vitro Corrosion and Mechanical Properties of porous Magnesium-Zinc Nanocomposite Scaffolds

نویسندگان

  • shamsodin mirdamadi School of Metallurgy and Materials Engineering, Iran University of Science and Technology
چکیده مقاله:

Due to good biocompatibility, corrosion and mechanical properties, magnesium (Mg) is considered promising degradable material for orthopedic applications. In this work, Mg-MgZnx (x= 1, 2, 3 and 4) nanocomposites scaffolds with different porosities were synthesized via powder metallurgy method. The microstructure, composition, in vitro corrosion and mechanical properties of porous magnesium-zinc nanocomposite scaffolds were investigated. The XRD results indicated the formed nano particles consist of MgZn and MgZn2 intermetallics. The SEM micrographs proved that Mg-Zn intermetallics nano particles with round morphology and size of 20–50 nm are homogenously dispersed in the Mg matrix. The results showed that the addition of Zn element increases the tensile strength and Young,s modulus. Also, Mg-MgZn and Mg-MgZn2 nanocomposites scaffolds synthesized improved the in vitro anti-corrosion property of the Mg. The best unti-corrosion property is obtained with 3% Zn and further increase of Zn content up 4% deteriorates the corrosion property. All the results suggest that the Mg-MgZnx nanocomposites scaffolds have the potential to serve as degradable implants for bone substitute applications.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

microstructure, in vitro corrosion and mechanical properties of porous magnesium-zinc nanocomposite scaffolds

due to good biocompatibility, corrosion and mechanical properties, magnesium (mg) is considered promising degradable material for orthopedic applications. in this work, mg-mgznx (x= 1, 2, 3 and 4) nanocomposites scaffolds with different porosities were synthesized via powder metallurgy method. the microstructure, composition, in vitro corrosion and mechanical properties of porous magnesium-zinc...

متن کامل

Fabrication of Porous Scaffolds with a Controllable Microstructure and Mechanical Properties by Porogen Fusion Technique

Macroporous scaffolds with controllable pore structure and mechanical properties were fabricated by a porogen fusion technique. Biodegradable material poly (d, l-lactide) (PDLLA) was used as the scaffold matrix. The effects of porogen size, PDLLA concentration and hydroxyapatite (HA) content on the scaffold morphology, porosity and mechanical properties were investigated. High porosity (90% and...

متن کامل

determination of some physical and mechanical properties red bean

چکیده: در این تحقیق، برخی خواص فیزیکی و مکانیکی لوبیا قرمز به-صورت تابعی از محتوی رطوبت بررسی شد. نتایج نشان داد که رطوبت بر خواص فیزیکی لوبیا قرمز شامل طول، عرض، ضخامت، قطر متوسط هندسی، قطر متوسط حسابی، سطح تصویر شده، حجم، چگالی توده، تخلخل، وزن هزار دانه و زاویه ی استقرار استاتیکی در سطح احتمال 1 درصد اثر معنی داری دارد. به طوری که با افزایش رطوبت از 54/7 به 12 درصد بر پایه خشک طول، عرض، ضخام...

15 صفحه اول

Microstructure, mechanical properties and in vitro bioactivity of akermanite scaffolds fabricated by laser sintering.

Akermanite had attracted great attention due to the favourable mechanical properties and excellent biological performance. In this research, the microstructure and mechanical properties of akermanite scaffolds fabricated via laser sintering under different process conditions were studied and characterized. The results showed that the akermanite particles gradually mixed together, grew up and re...

متن کامل

Evaluation of mechanical properties and apatite formation of synthesized fluorapatite-hardystonite nanocomposite scaffolds

In this study, mechanical properties and apatite formation ability of synthesized fluorapatite-hardystonite (FA-HT) nanocomposite scaffolds were investigated. Hardystonite (HT; 5 and 10 wt.%) as a reinforcement phase was incorporated into the FA scaffold. FA was mixed with HT for 4 h under argon gas at 220 °C. A space holder method was used for fabricating porous FA-HT scaffolds. Sodium chlorid...

متن کامل

Evaluation of microstructure and mechanical properties of bulk nanostructured Ti5Si3 and Ti5Si3-Al2O3 nanocomposite

Mechanical alloying and vacuum sintering have been used to produce bulk nanostructured Ti5Si3 and Ti5Si3-15Wt.% Al2O3 nanocomposite. X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM) were used to study the microstructural characteristics of the samples. Indentation method was used to calculate hardness, elastic modulus and fracture toughness ...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 1  شماره Number 1

صفحات  49- 58

تاریخ انتشار 2015-04-30

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023