Optimization of Fat Replacers and Sweetener Levels to Formulate Reduced- Calorie Pistachio Butter: A Response Surface Methodology

نویسندگان

  • B Emadzadeh Khorasan Research Institute for Food Science and Technology (KRIFST), Mashhad, Iran
  • M Hashemi Department of Food Processing, Iranian Academic Center for Education Culture and Research (ACECR), Mashhad, Iran
  • M Nassiri Mahallati Department of Agronomy, Ferdowsi University of Mashhad (FUM), POBox: 91775-1163, Mashhad, Iran
  • R Farhoosh Department of Food Science and Technology, Ferdowsi University of Mashhad (FUM), POBox: 91775- 1163, Mashhad, Iran
  • S. M. A Razavi Department of Food Science and Technology, Ferdowsi University of Mashhad (FUM), POBox: 91775- 1163, Mashhad, Iran
چکیده مقاله:

Consumers' awareness about the nutritional profile of their diets has made the industry to respond their needs seriously. In this study, response surface methodology was used to analyze the effect of three fat replacers and two sweeteners on sensory attributes and viscosity of low- calorie pistachio butter. Balangu seed extract (BSG) (0.01-0.04), Reihan seed gum (RSG) (0.01-0.023), xanthan (0.06-0.1), isomalt (0-1) and sucrose (0.25-1) were the levels investigated. A central composite design was used to develop models for the responses. The optimum levels of ingredients according to the target values were as follows: xanthan (0.1%), isomalt: pistachio paste ratio (0.81), sucrose: pistachio paste ratio (0.71) for formulas prepared using xanthan gum; Balangu seed extract (0.034%), isomalt: pistachio paste ratio (1) and sucrose: pistachio paste ratio (0.25) for products containing Balangu seed extract; and RSG (0.023%), isomalt: pistachio paste ratio (0.333) and sucrose: pistachio paste ratio (1.0) for formulas prepared by RSG.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

optimization of low-fat butter formulation according to its organoleptic properties using response surface methodology (rsm)

low-fat butter is water in oil emulsion comprising a continuous fat phase including butter, emulsifiers and colorants and also a dispersed aqueous phase including water, stabilizers and proteins. in this research, by using protein components especially full-fat soy flour, a product were produced which has extreme similarity to ordinary butter and also has good organoleptic properties. water : b...

متن کامل

Optimization of Fat-Reduced Puff Pastry Using Response Surface Methodology

Puff pastry is a high-fat bakery product with fat playing a key role, both during the production process and in the final pastry. In this study, response surface methodology (RSM) was successfully used to evaluate puff pastry quality for the development of a fat-reduced version. The technological parameters modified included the level of roll-in fat, the number of fat layers (50-200) and the fi...

متن کامل

Optimization of Water Based Drilling Fluid Produced Using Modified Nigerian Bentonite and Natural Biopolymers: Reduced experiment and Response Surface Methodology

Research has shown that many Bentonite in Nigeria are unsuitable for oil well drilling in their natural states. Their modification and blends with some additives could increase the yield and boost their suitability. Many indigenous polymers have become very popular due to environmental friendliness and their ability to modify rheology of clay suspension. However, the common natural polymers are...

متن کامل

Photocatalytic Removal of Amaranth Optimization Using Response Surface Methodology

Since Amaranth (AM) is one of the dye compounds which is harmful to human’s life its removal from industrial waste water would reduce their environmental impact and health effect. Copper nanoparticle (CuNP) is a simple and eco-friendly material which can be used to remove this pollutant. In this paper, copper nanoparticles were synthesized, for removal of AM dye. The experiments were designed b...

متن کامل

preparation and characterization of new co-fe and fe-mn nano catalysts using resol phenolic resin and response surface methodology study for fischer-tropsch synthesis

کاتالیزورهای co-fe-resol/sio2و fe-mn-resol/sio2 با استفاده از روش ساده و ارزان قیمت همرسوبی تهیه شدند. از رزین پلیمری resol در فرآیند تهیه کاتالیزور استفاده شد.

Optimization and Modeling of CuOx/OMWNT’s for Catalytic Reduction of Nitrogen Oxides by Response Surface Methodology

A series of copper oxide (CuOx) catalysts supported by oxidized multi-walled carbon nanotubes (OMWNT’s) were prepared by the wet impregnation method for the low temperature (200 °C) selective catalytic reduction of nitrogen oxides (NOx) using NH3 as a reductant agent in the presence of excess oxygen. These catalysts were characterized by FTIR, XRD, SEM-EDS, and H2-TPR meth...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 02  شماره 04

صفحات  37- 54

تاریخ انتشار 2011-12-01

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023