Preparation and characterization of Sr-Ti-hardystonite (Sr-Ti-HT) nanocomposite for bone repair application

نویسندگان

  • Hossein Mohammadi Department of Biomaterials, Science and Research Branch, Islamic Azad University, Yazd, Iran
  • Masoud Hafezi Biomaterials Group, Nanotechnology and Advanced Materials Department, Materials and Energy Research Center, Alborz, Iran | Pardis Pajoohesh Fanavaran Yazd, BT center, Yazd Science and Technology Park, Yazd, Iran
  • Mohammad Majid Sepantafar Department of Stem Cell and Developmental Biology at Cell Science Research Center, Royan Institute for Stem Cell Biology and Technology, ACECR, Tehran, Iran
  • Saeed Hesaraki Biomaterials Group, Nanotechnology and Advanced Materials Department, Materials and Energy Research Center, Alborz, Iran
چکیده مقاله:

Objective(s): Hardystonite (HT) is Zn-modified silicate bioceramics with promising results for bone tissue regeneration. However, HT possesses no obvious apatite formation. Thus, in this study we incorporated Sr and Ti into HT to prepare Sr-Ti-hardystonite (Sr-Ti-HT) nanocomposite and evaluated its in vitro bioactivity with the purpose of developing a more bioactive bone substitute material. Materials and methods:The HT and Sr-Ti-HT were prepared by mechanical milling and subsequent heat treatment. Calcium oxide (CaO), zinc oxide (ZnO) and silicon dioxide (SiO2) (all from Merck) were mixed with molar ratio of 2:1:2. The mixture of powders mixture was then milled in a planetary ball mill for 20 h. In the milling run, the ball-to-powder weight ratio was 10:1 and the rotational speed was 200 rpm. After synthesis of HT, 3% nanotitanium dioxide (TiO2, Degussa) and 3% strontium carbonate (SrCO3, Merck) were added to HT and then the mixture was ball milled and calcined at 1150°C for 6 h. Simultaneous thermal analysis (STA), X-ray diffraction (XRD), Transmission electron microscopy (TEM) and Fourier transform infra-red spectroscopy (FT-IR) performed to characterize the powders. Results:XRD and FT-IR confirmed the crystal phase and silicate structure of HT and TEM images demonstrated the nanostructure of powders. Further, Sr-Ti-HT induced apatite formation and showed a higher human mesenchymal stem cell (hMSCs) adhesion and proliferation compared to HT. Conclusion:Our study revealed that Sr-Ti-HT with a nanostructured crystal structure of 50 nm, can be prepared by mechanical activation to use as biomaterials for orthopedic applications.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

preparation and characterization of sr-ti-hardystonite (sr-ti-ht) nanocomposite for bone repair application

objective(s): hardystonite (ht) is zn-modified silicate bioceramics with promising results for bone tissue regeneration. however, ht possesses no obvious apatite formation. thus, in this study we incorporated sr and ti into ht to prepare sr-ti-hardystonite (sr-ti-ht) nanocomposite and evaluated its in vitro bioactivity with the purpose of developing a more bioactive bone substitute material. ma...

متن کامل

PYROELECTRIC PROPERTIES OF La-Sr-Co-O/Pb-La-Ti-O/La-Sr-Co-O HETEROSTRUCTURES

The realization of a commercially viable, thin-film uncooled pyroelectric detector has been the focus of research for several years. As part of this effort, we show that a conventional metallic electrode system (typically Pt) can be replaced with a conductive oxide such as LaxSr(1–x)CoO3 (LSCO). In addition to being crystallographically compatible with the lead-based, pyroelectric oxides such a...

متن کامل

Preparation and characterization of hydroxyapatite reinforced with hardystonite as a novel bio-nanocomposite for tissue engineering

Objecttive(s): Despite the poor mechanical properties of hydroxyapatite, its unique biological properties leads we think about study on improving its properties rather than completely replacing it with other biomaterials. Accordingly, in this study we introduced hydroxyapatite reinforced with hardystonite as a novel bio-nanocompositeand evaluate its in-vitro bioactivity with the aim of developi...

متن کامل

THE THERMOCHEMICAL AND TI-IERMOPHYSICAL FUNCTIONS OF SOLID Sr(OII), AND /I-Ba(OH),

Low-temperature heat capacities from 5 to 350 K by adiabatic calorimetry and high-temperature enthalpy increments above 450 K by drop calorimetry of high-purity Sr(OH), and /I-Ba(OH), have been measured. From the results, smoothed thermochemical and thermophysical functions of the two compounds have been tabulated at selected temperatures.

متن کامل

Biofunctional Sr- and Si-loaded titania nanotube coating of Ti surfaces by anodization-hydrothermal process

Background Two frequent problems associated with titanium (Ti) surfaces of bone/dental implants are their corrosion and lack of native tissue integration. Methods Here, we present an anodization-hydrothermal method for coating Ti surfaces with a layer of silicon (Si)- and strontium (Sr)-loaded titania nanotubes (TNs). The Ti surfaces coated with such a layer (Si-Sr-TNs) were characterized wit...

متن کامل

Preparation and characterization of cockle shell aragonite nanocomposite porous 3D scaffolds for bone repair

The demands for applicable tissue-engineered scaffolds that can be used to repair load-bearing segmental bone defects (SBDs) is vital and in increasing demand. In this study, seven different combinations of 3 dimensional (3D) novel nanocomposite porous structured scaffolds were fabricated to rebuild SBDs using an extraordinary blend of cockle shells (CaCo3) nanoparticles (CCN), gelatin, dextran...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 2  شماره 3

صفحات  203- 210

تاریخ انتشار 2015-07-01

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023