Removal of Dilute Benzene in Water through Ionic Liquid/Poly(Vinyl Chloride) Membranes by Pervaporation

نویسندگان

  • Tadashi Uragami Department of Chemistry and Materials Engineering, Kansai University, Suita, Osaka 564-8680, Japan
  • Takashi Miyata Organization for Research and Development of Innovative Science and Technology, Kansai University, Suita, Osaka 564-8680, Japan
  • You Matsuoka Department of Chemistry and Materials Engineering, Kansai University, Suita, Osaka 564-8680, Japan
چکیده مقاله:

This paper focuses on the effects of the addition of an ionic liquid, 1-Allyl-3-butylimidazilium bis(trifluoromethane sulfonyl)imide ([ABIM]TFSI), which has a high affinity for benzene, into the poly(vinyl chloride) (PVC) membrane on the pervaporation characteristics of the removal of benzene from aqueous solutions of dilute benzene. When aqueous solutions of 100~500 ppm benzene were permeated through the [ABIM]TFSI)/PVC membranes, they showed a high benzene/water selectivity and permeability of these membranes was enhanced with increasing [ABIM]TFSI content significantly. These pervaporation characteristics are discussed from the viewpoint of chemical and physical structure of [ABIM]TFSI)/PVC membranes in detail. The mechanism of permeation and separation was analyzed by the solution-diffusion model.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

removal of dilute benzene in water through ionic liquid/poly(vinyl chloride) membranes by pervaporation

this paper focuses on the effects of the addition of an ionic liquid, 1-allyl-3-butylimidazilium bis(trifluoromethane sulfonyl)imide ([abim]tfsi), which has a high affinity for benzene, into the poly(vinyl chloride) (pvc) membrane on the pervaporation characteristics of the removal of benzene from aqueous solutions of dilute benzene. when aqueous solutions of 100~500 ppm benzene were permeated ...

متن کامل

Removal of methyl tert-butyl ether from water by pervaporation using ceramic-supported polymer membranes

Pervaporation removal of methyl tert-butyl ether (MTBE) from dilute aqueous solutions was demonstrated using ceramic-supported polymer (CSP) membranes. These membranes were created by the free radical graft polymerization of vinyl acetate onto a vinyl trimethoxysilaneactivated porous silica substrate having a native average pore size of 500 Å. The resulting membranes consisted of poly(vinyl ace...

متن کامل

Influences of Permeate Pressure and Feed Flow Rate on Benzene Removal from Gasoline by Pervaporation

In this work, the effects of permeate pressure and feed flow rate on the performance of a composite polyvinyl alcohol (PVA) membrane in the removal of benzene from gasoline by pervaporation (PV) were evaluated. The results indicate the remarkable effect of permeate pressure on membrane performance as reducing permeate pressure (higher vacuum) from 30 to 3 mmHg causes the total flux to increase ...

متن کامل

Recent advances in VOCs removal from water by pervaporation.

Pervaporation (PV) is a separation process in which minor components of a liquid mixture are preferentially transported by partial vaporization through a non-porous permselective (selectively permeable) membrane. PV is an emerging technology in environment cleanup operations, especially in the removal of volatile organic compounds (VOCs) from industrial wastewaters or contaminated groundwaters....

متن کامل

Pervaporation Membranes for Biobutanol Production

Because of the emerging scarcity of oil resources and the demand for environmental protection, as a typical biofuel, biobutanol produced by biomass fermentation is critical for the development of renewable energy. Pervaporation is considered to be an attractive separation technology for both the recovery of butanol from fermentation broth and the dehydration of butanol from low-water content so...

متن کامل

DSC enthalpic transitions during starch gelatinization in excess water, dilute sodium chloride, and dilute sucrose solutions

Background: Starch phase transition characteristics were studied by pre-treating starch samples in excess water, dilute sodium chloride and dilute sucrose solutions and subjecting them to differential scanning calorimetry (DSC). Unmodified maize, wheat and potato starches were held at specific temperatures between 30 and 90 °C for 30 min and promptly cooled to 25 °C. Treated samples were then a...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 2  شماره 1

صفحات  20- 25

تاریخ انتشار 2016-01-01

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023