Simulation of Oil Reservoirs Driving Indices and Recovery Mechanisms

simulation of oil reservoirs driving indices and recovery mechanisms

different recovery mechanisms are activated during the production from reservoirs. wells sometimes are kept with the injection. therefore the evaluation of injection indices depended on material injection, seems to be necessary. this study is going to determine the drive indices for a reservoir by making a model using eclipse. the model consists a gas cap and aquifer, in which there is an injec...

Enhanced Oil Recovery in Fractured Reservoirs

simulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water

abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...

On the Reduction of Optimization Time in Simulation of Oil Reservoirs

Thermal recovery techniques including Fast-SAGD process increases the production efciency of heavy oil reservoirs. Effective parameters in this study included injection and production rates, height of the injection, production, and offset wells, production and injection cycles, and pressure of the offset wells. In this study, optimization studies were performed. The objective function was defned a...

RESEARCH ON CO2 FLOODING FOR IMPROVED OIL RECOVERY IN WATER FLOODING ABANDONED RESERVOIRS

CO2 injection is an effective technique for improved oil recovery in light oil reservoirs, especially for water flooding abandoned reservoirs. In this study, the lower part of Es1 reservoirs in Pucheng oilfield was introduced as the target reservoir. By studying the minimum miscible pressure in CO2 flooding, the reservoir could achieve miscible flooding. Long core displacement experiments prove...

Interactive cutaways of oil reservoirs

In the Oil and Gas industry, processing and visualizing 3D models is of paramount importance for making exploratory and production decisions. Hydrocarbons reservoirs are entities buried deep in the earth’s crust, and a simplified 3D geological model that mimics this environment is generated to run simulations and help understand geological and physical concepts. For the task of visually inspect...