The Buckling of Non-Homogeneous Truncated Conical Shells under a Lateral Pressure and Resting on a Winkler Foundation

نویسندگان

  • A Valiyev Chair of Mathematics and General Technical Subjects of Odlar Yurdu University, Baku, Azerbaijan
  • A.H Sofiyev Department of Civil Engineering, Suleyman Demirel University, Isparta 32260, Turkey
  • P Ozyigit Department of Civil Engineering, Suleyman Demirel University, Isparta 32260, Turkey
چکیده مقاله:

In this paper, the buckling of non-homogeneous isotropic truncated conical shells under uniform lateral pressure and resting on a Winkler foundation is investigated. The basic relations and governing equations have been obtained for non-homogeneous truncated conical shells. The critical uniform lateral pressures of non-homogeneous isotropic truncated conical shells with or without a Winkler foundation are obtained. Finally, carrying out some computations, effects of the variations of truncated conical shell characteristics, the non-homogeneity and the Winkler foundation on the critical uniform lateral pressures have been studied. The results are compared with other works in open literature.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Thermoelastic Analysis of Rotating Thick Truncated Conical Shells Subjected to Non-Uniform Pressure

In the present work, a study of thermoelastic analysis of a rotating thick truncated conical shell subjected to the temperature gradient and non-uniform internal pressure is carried out. The formulation is based on first-order shear deformation theory (FSDT), which accounts for the transverse shear. The governing equations, derived using minimum total potential energy principle, are solved, usi...

متن کامل

analytical solution for buckling of composite sandwich truncated conical shells subject to combined external pressure and axial compression load

abstract: the present study deals with the buckling analysis of the laminated composite truncated conical sandwich shells with flexible core subjected to combined axial compressive load and external pressure. higher order governing equations of the motion are presented for conical composite sandwich shells, where they are derived from the hamilton principle. then, by the use of improved higher-...

متن کامل

A Survey on Buckling and Vibrations of a Viscoelastic Beam under Distributed Lateral and Axial Loads

In this paper, based on Kelvin and Linear Standard Solid models, dynamic response and the buckling load of a viscoelastic beam under  lateral and axial loads have been determined. The governing equations have been extracted using Euler  and Timoshenko theories and their analytical solutions have been obtained by using the eigenfunctions expansion method. Buckling load have been calculated by us...

متن کامل

Stress Analysis of Rotating Thick Truncated Conical Shells with Variable Thickness under Mechanical and Thermal Loads

In this paper, thermo-elastic analysis of a rotating thick truncated conical shell subjected to the temperature gradient, internal pressure and external pressure is presented. Given the existence of shear stress in the conical shell due to thickness change along the axial direction, the governing equations are obtained based on first-order shear deformation theory (FSDT). These equations are so...

متن کامل

Damped Vibrations of Parabolic Tapered Non-homogeneous Infinite Rectangular Plate Resting on Elastic Foundation (RESEARCH NOTE)

 In the present paper damped vibrations of non-homogeneous infinite rectangular plate of parabolically varying thickness resting on elastic foundation has been studied. Following Lévy approach, the equation of motion of plate of varying thickness in one direction is solved by quintic spline method. The effect of damping, elastic foundation and taperness is discussed with permissible range of pa...

متن کامل

Torsional Stability of Cylindrical Shells with Functionally Graded Middle Layer on the Winkler Elastic Foundation

In this study, the torsional stability analysis is presented for thin cylindrical with the functionally graded (FG) middle layer resting on the Winker elastic foundation. The mechanical properties of functionally graded material (FGM) are assumed to be graded in the thickness direction according to a simple power law and exponential distributions in terms of volume fractions of the constituents...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 1  شماره 1

صفحات  14- 21

تاریخ انتشار 2009-04-30

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023