The Investigation of Modelling Material Behavior in Autofrettaged Tubes Made from Aluminium Alloys

نویسنده

karim aliakbari Department of Mechanical Engineering, Faculty of Montazeri, Khorasan Razavi Branch,Technical and Vocational University (TVU), Mashhad, Iran

چکیده مقاله:

Normal 0 false false false EN-US X-NONE AR-SA The ratio of compression yield strength to the initial tensile yield strength is called Bauschinger effect factor, BEF. A nonlinear strain hardening mathematical model is proposed for 7075 aluminium alloy (A7075). Uniaxial tension-compression experimental data are used to figure out a suitable model to study the BEF. Hence, uniaxial tension-compression tests on some specimens having 12.5 mm and 6 mm diameters were carried out by an Instron servohydraulic machine and were compared. In this paper several factors including Young’s modulus, the amount of offsets to determine yield point and BEF were studied. Besides, BEF in the aluminium tubes made from alloys of A5083 and A7075 were compared. This model will be employed to predict residual stress and fatigue life in autofrettaged tubes.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

this study investigated the relationship between quality of work life and organization citizenship behavior from the viewpoint of teachers in high schools in tehran city.

چکیده هدف از پژوهش حاضر بررسی رابطه کیفیت زندگی کاری و رفتار شهروندی سازمانی در مدارس مقطع متوسطه پسرانه شهر تهران از دیدگاه دبیران بود. روش پژوهش حاضر توصیفی و از نوع همبستگی بود. از بین دبیران مدارس شهر تهران تعداد 380 نفر به روش نمونه گیری خوشه ای چند مرحله ای به عنوان نمونه پژوهش انتخاب شدند و با تکمیل پرسشنامه ی کیفیت زندگی کاری والتون(1975) و پرسشنامه ی رفتار شهروندی سازمانی پودساکو...

15 صفحه اول

Recrystallization Behavior of Commercial Purity Aluminium Alloys

متن کامل

Laser welding of dissimilar aluminium alloys with filler material

Laser welding of dissimilar aluminium alloys with filler material Luís Filipe Amaro Pinto Instituto Superior Técnico – Technical University of Lisbon – Portugal September 2008 Abstract The aluminium alloys are materials with great potential because of its high strength and low weight. However, the welding of dissimilar aluminium alloys is difficult in autogeneous welding, due to these alloys ar...

متن کامل

Modelling of Precipitation Hardening in Casting Aluminium Alloys

Precipitation hardening, because it involves the hardening of the material over a prolonged time, is also called age hardening, or ageing. By the appropriate heat treatment of precipitation hardening, the strength or hardness of some heat-treatable aluminium alloys can be enhanced by the formation of nano-meter sized second-phase precipitated particles within the original phase matrix. The fine...

متن کامل