Thick Film Deposition of Carbon Nanotubes by Alternating Electrophoresis

نویسندگان

  • A.R. Gardeshzadeh Department of Nanomaterials and Nanocoatings, Institute for Color Science and Technology
چکیده مقاله:

Electrophoretic deposition of carbon nanotubes (CNTs) using alternating current electric fields (0.01-1000 Hz) is reported. Pure acetone was used as suspending medium. Two parallel gold electrodes were used as depositing substrate. The effect of depositing parameters such as frequency and three waveforms (sinusoidal, rectangular and triangular) on deposit yield was investigated. According to our experiments, thick films of CNTs are obtainable at frequencies as low as 0.01 to 10 Hz. Results showed that the deposit yield decreases as the frequency increases from 0.01 Hz to 1000 Hz. The rectangular waveform yields more deposit mass compared with sinusoidal and triangular waveforms. Comparison between AC and DC electric fields revealed that the deposition pattern is also different in AC and DC electric fields.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Multi-Directional Growth of Aligned Carbon Nanotubes Over Catalyst Film Prepared by Atomic Layer Deposition

UNLABELLED The structure of vertically aligned carbon nanotubes (CNTs) severely depends on the properties of pre-prepared catalyst films. Aiming for the preparation of precisely controlled catalyst film, atomic layer deposition (ALD) was employed to deposit uniform Fe(2)O(3) film for the growth of CNT arrays on planar substrate surfaces as well as the curved ones. Iron acetylacetonate and ozone...

متن کامل

Deposition of carbon nanotubes in commonly used sample filter media

There is no single standard technique or methodology to characterize the size, structure, number, and chemical composition of airborne carbon nanotubes.  Existing analytical instruments and analytical techniques for evaluating nanoparticle concentrations cannot simultaneously provide morphology, state of agglomeration, surface area, mass, size distribution and chemical composition data critical...

متن کامل

A Disposable Biosensor for Organophosphorus Nerve Agents Based on Carbon Nanotubes Modified Thick Film Strip Electrode

A disposable biosensor based on acetylcholinesterase-functionalized acid purified multi-wall carbon nanotubes (CNTs) modified thick film strip electrode for organophosphorus (OP) insecticides was developed. The degree of inhibition of the enzyme acteylcholinesterase (AChE) by OP compounds was determined by measuring the electrooxidation current of the thiocholine generated by the AChE catalyzed...

متن کامل

Dielectrophoretic Deposition and Alignment of Carbon Nanotubes

The carbon nanotube (CNT) is a unique form of carbon material. Since its discovery, CNT has been intensively studied due to its remarkable electrical, mechanical, thermal, and chemical properties (Iijima, 1991; Katz & Willner, 2004). Based on the structures and dimensions, CNTs can be divided into two groups: single-walled carbon nanotubes (SWNTs) and multi-walled carbon nanotubes (MWNTs). An S...

متن کامل

Immobilization of carbon nanotubes on functionalized graphene film grown by chemical vapor deposition and characterization of the hybrid material

We report the surface functionalization of graphene films grown by chemical vapor deposition and fabrication of a hybrid material combining multi-walled carbon nanotubes and graphene (CNT-G). Amine-terminated self-assembled monolayers were prepared on graphene by the UV-modification of oxidized groups introduced onto the film surface. Amine-termination led to effective interaction with function...

متن کامل

Effect of bias voltage on structural and mechanical characteristics of diamond-like carbon thin film applied by ion beam deposition

This study, investigates the effect of bias voltage on structural changes of diamond-like carbon thin film created by ion beam deposition is investigated. For this purpose, the bias voltage in the values of 0 V, -50 V, -100 V and -150 V on the AA5083 aluminum alloy was considered. Raman spectroscopy was used to evaluate structural. Influence of the bias voltage on the thickness and roughness of...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 3  شماره 1

صفحات  27- 31

تاریخ انتشار 2010-08-06

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023