introduction: nickel is found in varies industrial processes such as electroplating, leather tanning, cement preservations, paints and pigments, textile, steel fabrication and canning industries. it is proved that ni(ii) has several health hazards such as carcinogenic. the aim of this study was the evaluation of ni(ii)adsorption on apple peel granola from aqueous solution. material and methods:...

The ability of Clinoptilolite powder to adsorb Ni (II) ions from wastewater which was taken from a nickel plating factory was investigated through batch experiments. The Ni (II) adsorption was found to be dependent on mass of adsorbent, contact time, pH value of solution and the speed of agitation. The experimental isotherms data were fitted into Langmuir and Freundlich models. The monolayer ad...

background: in recent years, various toxic chemicals/compounds have been widely detected at dangerous levels in drinking water in many parts of the world posing a variety of serious health risks to human beings. one of these toxic chemicals is lead, so this paper aimed to evaluate of efficiency coconut husk as cheap adsorbent for removal lead under different conditions. methods: in the spring o...

Chromium is one of the most common heavy metals which exist in very high concentrations in wastewater. The removal is very expensive due to the high cost of normal adsorbents. Lignocellulosic materials and mainly treated materials have proven to be a good solution for this problem. Adsorption tests were performed at different pH, different times and with varying concentrations. Results show tha...

The aim of this study was to evaluate the efficiency of nano-sized cellulose obtained from rice husk for Cr(VI) adsorption. The effect of operational parameters including initial pH (3-10), contact time (0-120 min), adsorbent dosage (0.2-1.5 g/L), and initial Cr(VI) concentration (5-50 mg/L) were investigated according to one factor at time method. The results showed, in pH=6, contact time=100 ...

background: phenol is an organic pollutant found in industrial effluents that is very toxic to humans and the environment. this study used pomegranate peel ash as a natural absorbent to remove phenol from aqueous solutions. methods: in this study, pomegranate peel ash in different doses was used as a new adsorbent for the removal of phenol. the effects of contact time, ph, adsorbent dose and in...

A new type of grafting chitosan (CTS) was synthesized using 2-hydroxyethyl-trimethyl ammonium chloride (HGCTS). The adsorption of Cr(VI) on HGCTS was studied. The effect factors on adsorption and the adsorption mechanism were considered. The results indicated that the HGCTS could concentrate and separate Cr(VI) at pH 4.0; the adsorption equilibrium time was 80 min; the maximum adsorption capaci...

Backgrounds & objectives: Contamination of the environment by heavy metals, pollute water and agricultural products. The aggregation of these metals will cause various diseases for human. Therefore, it is important to study how to make them safe. The purpose of this study is to evaluate the efficiency of starch-iron oxide nanocomposite in removing two heavy metals, nickel and cadmium, from wast...