The fracture strength of silicon nanowires grown on a [111] silicon substrate by the vapor-liquid-solid process was measured. The nanowires, with diameters between 100 and 200 nm and a typical length of 2 microm, were subjected to bending tests using an atomic force microscopy setup inside a scanning electron microscope. The average strength calculated from the maximum nanowire deflection befor...

Surface micro- and nanobubbles were formed in situ using a conventional scanning electron microscope by radiolysis of water confined liquid cells with electron-transparent windows. The shapes contact angles the bubbles at window corner directly measured microscope. All observed close to 90°, regardless size, indicating that had almost maximized Laplace pressure. Bubble formation far from irradi...

The morphology of red cells damaged by 2-aminoethylisothiouronium bromide (AET) has been compared to that of PNH cells by transmission and scanning electron microscopy. The main features of the effect of AET as demonstrated by the scanning electron microscope were spherical and deformed cells, with surface craters and relatively large pits. The transmission electron microscope revealed loss of ...

To apply the nanomaterial as a component in the packaging material structure, in this research, the carboxymethyl cellulose (CMC)/polyvinyl alcohol (PVA) film were prepared with three levels of nanoclay particles (0.5, 1 and 3%) using solution casting evaporation method. The incorporation of nanoclay on mechanical, water vapor permeability, and oxygen barrier properties of CMC/PVA-based film wa...

The carboxymethyl cellulose (CMC)/polyvinyl alcohol (PVA) film were prepared by adding three levels of nanoclay particles (0.5, 1 and 3%) using solution casting evaporation method. The incorporation of nanoclay on mechanical, water vapor permeability, and oxygen barrier properties of CMC/PVA-based film was investigated. The best result was obtained through the nanocomposite film contain 3% nano...

Scanning capacitance microscopy and spectroscopy combined with numerical simulations have been used to image nanoscale electronic structures in In0.30Ga0.70N/GaN quantum-well heterostructures grown by metalorganic chemical vapor deposition. Macroscopic capacitance– voltage spectroscopy and numerical simulations indicate that, depending on the bias voltage applied, either electron or hole accumu...

Plasma enhanced chemical vapor deposition (PECVD) is a versatile technique to obtain vertically densealigned carbon nanotubes (CNTs) at lower temperatures than chemical vapor deposition (CVD). In this work, we used magnetron sputtering to deposit iron layer as a catalyst on silicon wafers. After that, radio frequency (rf) assisted PECVD reactor was used to grow CNTs. They were treated with wate...

Mechanisms responsible for the contrast between differently doped areas in semiconductors, which is observed in electron micrographs, is discussed as regards the key factors determining the sign and magnitude of the contrast. Experimental data obtained by means of the scanning electron microscope (SEM), scanning low energy electron microscope and photoelectron emission microscope are reviewed t...

The sandstone reservoirs in the Upper Paleozoic He 8 Member northern Tianhuan depression of Ordos Basin are vastly different and feature particularly complex gas–water distributions. Scanning electron microscopy, fluorescence, Raman spectroscopy inclusions, relative permeability analysis, nuclear magnetic resonance were utilized this study based on core data, identification statistics, various ...

Novel "micelles enhanced" polyelectrolyte (PE) capsules based on functional templates of hybrid calcium carbonate were fabricated. Evidences suggested that the structure of capsule wall was different from that of conventional PE capsules, and the wall permeability of these PE capsules changed significantly. Lysozyme, a positively charged protein in neutral solution, was studied as a model prote...