the use of structural adhesives in automotive structures has been increased recently for their role in noise, vibration and harshness (nvh). therefore, the dynamic behavior of structures containing bonded joints has become an area with numerous investigations over the past decades. development of accurate formulations capable of representing adhesively bonded joint dynamics is a step forward in...

in this paper, first design and analysis history of full metal cng cylinders for vehicle are investigated. next with respect to the cng worldwide standards, a full metal type cylinder is designed and analysed. then the numerical analysis results and practical results are compared, and the correctness of the investigation is verified. in the end, the most suitable alloy with respect to the dimen...

the finite element method (fem) is one of advanced methods in modeling of solid mechanics used in the design and analyzing of prosthesis in the human body. one of the important factors in designing a femur (the linkage between basin and knee) which is under complicated stresses is to minimize the amount of the stress in the components of the prosthesis due to the body weight. in this research t...

background: the salvage proximal femoral osteotomy is performed in mild or moderate osteoarthritis when the articulating surfaces are normal and relieves the subject’s pain. because the importance of angular mal-alignment of the femur bone at the hip junction accurate pre-op planning based on patient specific anatomy is required to prevent any lower limb misalignment and joint problem pre-opera...

the purpose of this study was to determine the influence of platform switching on stress distribution of two different implant systems using three-dimensional (3d) finite element models.six 3d finite element models were created to replicate two different implant systems with peri-implant bone tissue, in which six different implant-abutment configurations were represented: model xive-a: 3.8-mm-d...

objectives: this study sought to assess the effects of length and inclination of implants on stress distribution in an implant and terminal abutment teeth in an implant assisted-removable partial denture (rpd) using three-dimensional (3d) finite element analysis (fea).   materials and methods: in this in vitro study, a 3d finite element model of a partially dentate mandible with a distal extens...

In this study, Buckling Limit of Strain (B.L.S.) is introduced as one of the most important limiting factors in cold roll forming process. B.L.S. is calculated by the finite element procedure. Then for two particular processes with existing analysis and experimental results, B.L.S. has been determined and evaluated. LUSAS 12.3 is used for finite element analysis. The results show that when buck...

finite element and boundary methods in structural finite element and boundary methods in structural finite element and boundary methods in structural finite element and boundary methods in structural finite element and boundary methods in structural finite element and boundary methods in structural finite element and boundary methods in structural introduction to finite element vibration analys...