In this paper, the modified couple stress theory is used to study vibration analysis of functionally graded rectangular micro-plates. Considering classical and first order plate theories, the couple governing equations of motion are obtained by using the Hamilton’s principle. Considering an assumed mode method, the accurate size dependent natural frequencies are established for simply supported...

The thermomechanical buckling of simply supported thin shallow spherical shells made of functionally graded material is presented in this paper. A metal-ceramic functionally graded shell with a power law distribution for volume fraction is considered, where its properties vary gradually through the shell thickness direction from pure metal on the inner surface to pure ceramic on the outer surfa...

Background: A theoretical study was performed of mode II delamination in a multilayered functionally graded beam configuration with considering the material non-linearity. Methods: The fracture was analysed by the J-integral approach. Two laws (quadratic and exponential) for variation of the modulus of elasticity along the beam height were applied. The J-integral closed form non-linear analytic...

In the present work, study of the vibration of a functionally graded (FG) cylindrical shell made up of stainless steel, zirconia, and nickel is presented. Free vibration analysis is presented for FG cylindrical shells with simply supported-simply supported and clamped–clamped boundary condition based on temperature independent material properties. The equations of motion are derived by Hamilton...

functionally gradedpoisson’s ratio structures have been developed for critical protection. in thispaper, the static bending and buckling of fgpr nanoscale beam are studied basedon the nonlocal timoshenko beam model, in which both young’s modulus andpoisson’s ratio are assumed to vary continuously in the thickness direction. byutilizing total potential energy principle, equilibrium equations are...

this paper investigates the effect of different methods of carbon nanotubes distribution in a thin matrix on static and dynamic behavior of the nanocomposite. five different symmetric patterns of distribution are considered, including four parabolic patterns and a linear one. for each pattern, the effective mechanical properties of the resultant nanocomposite are calculated using the rule of mi...

An analytical method for predicting elastic–plastic stress distribution in a cylindrical pressure vessel has been presented. The vessel material was a ceramic/metal functionally graded material, i.e. a particle–reinforcement composite. It was assumed that the material’s plastic deformation follows an isotropic strain-hardening rule based on the von-Mises yield criterion, and that the vessel was...

In this paper, the interface crack of two non-homogenous functionally graded materials is studied. Subsequently, with employing the displacement method for fracture of mixed-mode stress intensity factors, the continuous variation of material properties are calculated. In this investigation, the displacements are derived with employing of the functional graded material programming and analysis o...

This article focused on the stress analysis of an edge crack in a thin hallow rotating functionally graded material (FGM) disk. The disk is assumed to be isotropic with exponentially varying elastic modulus in the radial direction. A comprehensive study is carried out for various combinations of the crack length and orientation with the different gradation of materials. The effect of non-unifor...

This article is concerned with the theoretical analysis of the functionally graded magneto-electro-thermoelastic hollow sphere due to uniform surface heating. We analyze the transient thermoelastic problem for a functionally graded hollow sphere constructed of the spherical isotropic and linear magneto-electro-thermoelastic materials using a laminated composite mode as one of theoretical approx...