Following our innovative experimental spontaneous fracture models for frictional fractures (compression and shear) and mixed-mode fractures (tension and shear) in identical materials, we designed a laboratory model to investigate the effects of material contrast on mixed-mode spontaneous fracture along a bimate-rial interface. A series of interesting phenomena are observed, including asymmetry ...

Mixed-mode fracture of an adhesively-bonded structure made from a commercial adhesive and a dual-phase steel has been studied under different rates. Since mixedmode fracture occurs along the interface between the steel and adhesive, the cohesiveparameters for the interface were required. The mode-II interfacial properties were deduced in earlier work. In this paper the mode-I interfacial toughn...

The reflection-mode digital gradient sensing (rDGS) method is extended for visualizing and quantifying crack-tip deformations in solids under quasi-static and dynamic loading conditions. The r-DGS technique employs digital image correlation principles to quantify two orthogonal surface slopes simultaneously in specularly reflective solids by measuring small deflections of light rays. Here, for ...

This paper presents a coupling technique for integrating the element-free Galerkin method (EFGM) with the traditional ®nite element method (FEM) for analyzing linear-elastic cracked structures subject to mode-I and mixed-mode loading conditions. The EFGM was used to model material behavior close to cracks and the FEM in areas away from cracks. In the interface region, the resulting shape functi...

This paper investigates the roles of external loads and specimen geometry on crack path selection in adhesively bonded joints. First, the effect of mixed mode fracture on crack path selection is studied. Using epoxy as an adhesive and aluminum as the adherends, double cantilever beam (DCB) specimens with various T-stress levels are prepared and tested under mixed mode fracture loading. Post-fai...

Abstract The paper contains the results of an experimental investigation fatigue crack development under mixed-mode I + II and III in heat-treated 42CrMo4 steel. Tests were performed on compact tension shear specimens rectangular cross-section for III. Mixed-mode tests conducted 30 60° loading angle, while test was 45°. Additionally, presents fracture analysis path development.

In this paper, three-dimensional modeling of the fatigue crack growth profiles was performed in a simple riveted lap joint. Simulation results showed that mode I was dominated on the one side of the plates and the crack straightly grew on this side, while the other side of the plates was in a mixed-mode condition and the crack propagation path was not straight on this side. Afterward, the fract...

Mixed mode I/III fatigue fracture behaviour of bulk polymers is scarcely investigated. Thus, the aim this work to focus on comparison pure I and mixed loading polyethylene. During testing, both increases decreases lifetime were observed, depending levels applied III loading. Additionally, critical influence friction accompanying increase local temperature between shear loaded crack flanks in II...