To enhance the mechanical properties in Ni-alumina nanocomposite coatings, it is necessary to increase the amount of alumina nanoparticles participation in nickel matrix. The aim of this study is the compassion investigation of Ni-Al2O3 nanocomposite coatings’ embedded nanoparticles affected by methanol addition to the electrolyte. In this investigation the composition of electrolyte was modifi...

Metals that work at high temperatures (for instance, superalloys in gas-turbines) depend on thermally grown oxide (TGO, commonly alumina) to withstand corrosion attack. Nickel Aluminide (NiAl) as one superior alumina TGO former plays an important role in protective coatings for turbine blades in gas-turbine engines used for aircraft propulsion and power generation. Lowering TGO growth rate is e...

Nickel chromium (NiCr) powders with different titanium diboride (TiB2) additions (20, 40 and 60 wt %) were prepared with a mechanical alloying method and then sprayed using an air plasma spraying technology. The microstructure and phase composite of the powders and the cross-sections of deposited coatings were analyzed with a scanning electronic microscope and X-ray diffraction. The tribologica...

m e pretreatment process can significantly affect the corrosion resistance of Electroless Nickel (EN) coatings. One of the most important reasons is that different pretreatment processes can give different surface morphologies of the substrate. The Sanning Electronic Microscope (SEM) and the Scanning Tunneling Microscope (STM) have been used to investigate the structure and properties of EN coa...

We report a rapid, self-catalyzed, solid precursor-based thermal plasma chemical vapor deposition process for depositing a conformal, nonporous, and optically transparent nanocrystalline ZnO thin film at 130 Torr (0.17 atm). Pure solid zinc is inductively heated and melted, followed by ionization by thermal induction argon/oxygen plasma to produce conformal, nonporous nanocrystalline ZnO films ...

In order to begin to prepare a novel orthopedic implant that mimics the natural bone environment, the objective of this in vitro study was to synthesize nanocrystalline hydroxyapatite (NHA) and coat it on titanium (Ti) using molecular plasma deposition (MPD). NHA was synthesized through a wet chemical process followed by a hydrothermal treatment. NHA and micron sized hydroxyapatite (MHA) were p...

Coatings of carbon nanoparticles dispersed in SiO2, ZnO and NiO matrices on aluminium substrates have been fabricated by a sol–gel technique. Spectrophotometry was used to determine the solar absorptance and the thermal emittance of the composite coatings with a view to apply these as selective solar absorber surfaces in solar thermal collectors. Cross-sectional high resolution transmission ele...

Nanocrystalline 3mm thick Cu1–xNix (0.45 £ x £ 0.87) films are electrodeposited galvanostatically onto Cu/Ti/Si (100) substrates, from a citrateand sulphate-based bath containing sodium lauryl sulphate and saccharine as additives. The films exhibit large values of reduced Young’s modulus (173< Er< 192GPa) and hardness (6.4<H< 8.2GPa), both of which can be tailored by varying the alloy compositi...