The aim of this work was to prepare hydroxyapatite coatings (HAp) by a sol-gel method on Ti6Al4V alloy and to study the bioactivity, biocompatibility and corrosion protection behaviour of these coatings in presence of simulated body fluids (SBFs). Thermogravimetric/Differential Thermal Analyses (TG/DTA) and X-ray Diffraction (XRD) have been applied to obtain information about the phase transfor...

A 26-year-old female chemist formulated polymers and coatings usually using silver ink particles. When she later began working with nickel nanoparticle powder weighed out and handled on a lab bench with no protective measures, she developed throat irritation, nasal congestion, "post nasal drip," facial flushing, and new skin reactions to her earrings and belt buckle which were temporally relate...

Nanocomposite Nb-C coatings, with a C/Nb ratio of 0.93 1.59, have been deposited by reactive sputtering in a commercial sputtering system where the C is supplied from an acetylene gas at deposition rates of up to 200 nm/min. The coatings are compared to nonreactively sputtered Nb-C coatings deposited from Nb and C targets in lab-scale equipment at deposition rates two orders of magnitude lower....

We demonstrate cyclic strain hardening and frequency-dependent fatigue life in electrodeposited nanocrystalline Ni subjected to tension–tension cyclic deformation. These observations are rationalized through mechanistic arguments based on the exhaustion of dislocation sources in the early stages of cyclic loading and on the domination of diffusive processes during later stages. 2005 Acta Materi...

The electromagnetic and microwave absorbing properties of nickel ferrite nanocrystals were investigated for the first time. There were two frequencies corresponding to the maximum reflection loss in a wide thickness range from 3.0 to 5.0 mm, which may be bought by the nanosize effect and the good crystallization of the nanocrystals.

A simple and efficient route to prepare supported nanocrystalline oxides is presented. The synthesis procedure, i.e. in situ autocombustion of a glycine complex, allows the production of nanocrystals in a porous matrix presenting larger pore size. An example of successful formation of 2-5 nm nanocrystals is given for a single oxide (Fe(2)O(3)), a mixed-oxide structure (LaCoO(3) perovskite-type)...

The plastic behavior of crystalline materials is mainly controlled by the nucleation and motion of lattice dislocations. We report in situ dynamic transmission electron microscope observations of nanocrystalline nickel films with an average grain size of about 10 nanometers, which show that grain boundary-mediated processes have become a prominent deformation mode. Additionally, trapped lattice...

Direct electrode/neuron interfacing is a key challenge to achieve high resolution of neuronal stimulation required for visual prostheses. Neuronal interfacing on biomaterials commonly requires the presence of glial cells and/or protein coating. Nanocrystalline diamond is a highly mechanically stable biomaterial with a remarkably large potential window for the electrical stimulation of tissues. ...

The oxidation of both low and high-activity simple and Pt-modified aluminide coatings on nickel base superalloy IN738 has been studied in static air at 1100 OC up to 1000 h. For all coatings oxidation followed a parabolic law up to 400 h. The two Pt-modified coatings showed better protectiveness with lower mass gains and smaller rate constants, especially for long reaction times. The presence o...

Hydroxyapatite nanocrystals in natural form are a major component of bone--a known piezoelectric material. Synthetic hydroxyapatite is widely used in bone grafts and prosthetic pyroelectric coatings as it binds strongly with natural bone. Nanocrystalline synthetic hydroxyapatite films have recently been found to exhibit strong piezoelectricity and pyroelectricity. While a spontaneous polarizati...