This paper addresses the problem of repairing multiple cracked beams subjected to static load using piezoelectric patches. First, is formulated and solved analytically for case two cracks that results in ratio restoring moments produced by employed Since dependent only on crack positions but not their depth, result obtained has been extended cracks. proposition then validated finite element sim...

Using standard microelectromechanical system (MEMS) processes to coat a microcantilever with a piezoelectric layer results in a versatile transducer with inherent self-sensing capabilities. For applications in multifrequency atomic force microscopy (MF-AFM), we illustrate that a single piezoelectric layer can be simultaneously used for multimode excitation and detection of the cantilever deflec...

Ion Beam Implantation Aluminium nitride (AlN) is central to a range of RF filter and resonators at the heart 5G technologies. Under suitable conditions, as shown by Holger Fiedler, John Kennedy co-workers in article number 2100358, piezoelectric modulus epitaxial AlN increases ion beam implantation noble gases. This effect originates from finite volume deformed with giant piezoelectricity; stab...

We calculate the tensile and shear moduli of a series of boron nitride nanotubes and their piezoelectric response to applied loads. We compare in detail results from a simple molecular mechanics (MM) potential, the universal force field, with those from the atomistic finite element method (AFEM) using both Euler-Bernoulli and Timoshenko beam formulations. The MM energy minimisations are much mo...

We report an approach for growing aligned ZnO nanowire arrays with a high degree control over size, orientation, dimensionality, uniformity, and possibly shape. Our method combines e-beam lithography and a low temperature hydrothermal method to achieve patterned and aligned growth of ZnO NWs at <100degreesC on general inorganic substrates, such as Si and GaN, without using catalyst. This approa...

Piezoelectric nanomaterials (PNs) are attractive for applications including sensing, actuating, energy harvesting, among others in nano-electro-mechanical-systems (NEMS) because of their excellent electromechanical coupling, mechanical and physical properties. However, the properties of PNs do not coincide with their bulk counterparts and depend on the particular size. A large amount of efforts...

A sea wave energy harvester from the longitudinal wave motion of water particles is developed. The harvester consisting of a cantilever substrate attached by piezoelectric patches and a proof mass is used to collect electrical energy owing to the electromechanical coupling effect of the piezoelectric patches from the longitudinal wave motion. To the output charge and voltage from the piezoelect...

Energy harvester is a self-generating energy source which is able to run small scale electronic devices. It largely reduces the dependency on external power source. This paper represents the utilization of micro cantilever beam to develop a vibration based electromechanical systems (MEMS) piezoelectric energy harvester system. The proposed micro cantilever part has been developed by finite elem...

We call piezoelectromechanical (PEM) truss beam a truss modular beam coupled with a transmission electrical line when the coupling is obtained by piezoelectric actuators which act as bars in the module and as capacitances in the electrical line. The truss module length is assumed negligible with respect to the considered wave lengths. The transmission electrical line is assumed continuously dis...

Design and control of smart structures, which can perform optimally despite different environmental influences represents an important research challenge. Very often the optimality performance is influenced by the lack of robustness of mechanical systems due to unmodeled dynamics and external influences. In this paper we tackle the problem of a robust controller design for the vibration suppres...