Movement prediction and movement production.

نویسندگان

  • M Wexler
  • F Klam
چکیده

The prediction of future positions of moving objects occurs in cases of actively produced and passively observed movement. Additionally, the moving object may or may not be tracked with the eyes. The authors studied the difference between active and passive movement prediction by asking observers to estimate displacements of an occluded moving target, where the movement was driven by the observer's manual action or was passively observed. In the absence of eye tracking, they found that in the active condition, estimates are more anticipatory than in the passive conditions. Decreasing the congruence between motor action and visual feedback diminished but did not eliminate the anticipatory effect of action. When the target was tracked with the eyes, the effect of manual action disappeared. Results indicate distinct contributions of hand and eye movement signals to the prediction of trajectories of moving objects.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Simulation of municipal landfill leachate movement in soil by HYDRUS-1D model

Different numerical and analytical models are presently available that provide the tools to predict pollutant and water transfer processes between the soil surface and the groundwater level. Among the existing models, the Hydrus-1D model has been used for years in the prediction of water and pollutants transfer in the unsaturated zone. The main purpose of this paper was to model the movement of...

متن کامل

Functional Movement Screening Tests for the Prediction of Injuries in Volleyball: A Qualitative Study

Background. There is little evidence to support the comprehensiveness of FMS in sports populations to predict injuries. Ignoring rapid decelerations and high eccentric forces which may be characteristics of high risk for injury are evident in these tests. With this in mind, it seems logical to use tests to assess the performance of athletes so as to evaluate speed components as well as to ident...

متن کامل

A Novel Approach for Formability Prediction of Tailor Welded Blank

Formability of Tailor Welded Blank (TWB) is an important parameter which limits this kind of blanks usage. A forming criterion for tailor welded blank is presented based on the analytical model in this research. This criterion suggests Limit Strength Ratio (LSR) and Limit Thickness Ratio (LTR) for forming limit of TWB. When thickness ratio or strength ratio in tailor welded blank is greater tha...

متن کامل

Investigation of Parameters Effect Resin Movement Velocity at Vacuum Assisted Resin Transfer Molding Method (VARTM)

In this paper, Vacuum Assisted Resin Transfer Molding (VARTM) method was simulated by analytical solution. Then the effect of parameters like fiber density, distribution of layer thickness, perform layer thickness, resin viscosity was investigated theoretically. Obtained results show that by selecting optimum distribution layer thickness, increasing fiber volume fraction, reducing viscosity of ...

متن کامل

Investigation of Parameters Effect Resin Movement Velocity at Vacuum Assisted Resin Transfer Molding Method (VARTM)

In this paper, Vacuum Assisted Resin Transfer Molding (VARTM) method was simulated by analytical solution. Then the effect of parameters like fiber density, distribution of layer thickness, perform layer thickness, resin viscosity was investigated theoretically. Obtained results show that by selecting optimum distribution layer thickness, increasing fiber volume fraction, reducing viscosity of ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Journal of experimental psychology. Human perception and performance

دوره 27 1  شماره 

صفحات  -

تاریخ انتشار 2001