تهیه‌ی نانو پودرهای هسته‌-پوسته‌ی اکسیدهای آهن - رویFe3O4- ZnO) ) و بررسی ویژگی‌های نوری و مغناطیسی آن

In this study, at first the magnetite (Fe3O4) nano particles were prepared by sol-gel method under inert atmosphere using ferric nitrate (Fe (NO3)3.9H2O) and ethylene glycol (C2H6O2) as precursors. In the next stage, magnetite nanoparticles were modified by Sodium citrate under Ar atmosphere. Also zinc oxaid (ZnO) nanoparticles were provided via co-precipitation route and heat treatment using ammonium carbonate and zinc acetate as precursors. The precursor was dried and then calcined at 350oC. Finally with the ZnO and modified Fe3O4 nanoparticles, core–shell system was produced. X-ray diffraction pattern (XRD) considered structure characteristic and the size of crystallites. Morphology and the average size of particles were determined by SEM and TEM electron microscope. The UV absorption spectra show that absorption wavelength value for Fe3O4/ZnO core-shell is increased in comparison with ZnO pure nanoparticles.  FT-IR Spectra indicated the characteristic absorption of Zn–O bond is at 443/81 cm-1 and   Fe–O bond is at 540/20 m-1. Variation of magnetization of samples with respect to the external field was investigated by Vibrating Sample Magnetometer (VSM). Investigation shows that Fe3O4 nanoparticles are super paramagnetic but Fe3O4/ZnO core-shell nanopowders are ferromagnetic. On the other hand, in core-shell system, the amount of remanence or coercivity field have not had a considerable changes with increasing in molar ratio of ZnO to magnetite.